|
Installing a Tach on 1996 Tacoma 4wd
Has anyone attempted this?
I have a base 4wd, with a 2.7L. The combi meter has no tach. I'd like to install one and have been investigating the wiring diagrams but I am unsure how to proceed.
The distributor has an internal coil and the ignitor is behind the air cleaner box. The Haynes manual show tach out from the ignitor, but what wire is it?
Where does the green wire from the tach connect to? Any advice on which wires to tap (and how for the remaining red/black/white.
Any help would be appreciated. Thanks, Bob J.
Last edited by bkiaj; 08-01-2003 at 11:22 PM.
|
