15.141 @ 95.40mph

[MATR6]

Went to the track on Tues night.
Posted this on MO.com and MV.net.

Temp < 50 degrees, it was cold!
Humitidy ~ 50%
Front Tire Pressure: 27 lbs.(warm)
Fuel at 1/4 tank, ~ 10 gal used.

To all those who think Unichip doesn't work, well here's proof other than dyno graphs that it does work.
I don't think removing the rear interior would give me 15.1.

R/T .118 (.000 is perfect reaction time)
60' 2.326
330 6.492
1/8 9.853 @ 77.44
1000 12.726
1/4 15.141 @ 95.40

Mods:
AEM CAI
Speed-Source Brass Cable Bushings
TRD Quick Shifter
Unichip: B Map

OEM 16s
Removed: rear seats, spare tire, storage compartments.

[mistamatrix]

[Deep]

What tires? XR or XRS?

Either way, thats quick.

[kasimmmmm]

wow! impressive! Manual makes a BIG difference! With that 1/4 time, you can take out a V6 accord...and a V6 camry.
By the way, I was just wondering... wuts Brass Cable Bushing?

[MATR6]

Originally posted by Deep
What tires? XR or XRS?

Either way, thats quick.

I have an '03 XRS 6-Speed, says in my sig.
I had the OEM Good Year RSAs.

Yeah, I was surprised at the #s too.

I'm amazed how the Unichip does help give me around .5 sec off the 1/4 mile.

Last time I went to the track, I had my 18s, full interior, 2/3 tank of gas and ran a best 16.1.
My rims & tires weigh 46lbs (+5lbs more than the OEM 16s, so that slowed me down)

Stock XRS 6 Speed runs around 15.5 with a good driver.

[MATR6]

Originally posted by kasimmmmm
wow! impressive! Manual makes a BIG difference! With that 1/4 time, you can take out a V6 accord...and a V6 camry.
By the way, I was just wondering... wuts Brass Cable Bushing?

The Brass Cable Bushings go at the transmission side of the cables.
There's 2 of them, stock ones are rubber.

I got them at http://speed-source.net/
Click on Shifter Calbe Bushing Kit.

I think it fits most if not all Toyotas.

I'm satisfied w/ my 1/4 time, I only have a N/A 1.8L engine with 'minor' mods.

[boroEF]

15.1 with just a program and intake??? props

[Deep]

Originally posted by MATR6
I have an '03 XRS 6-Speed, says in my sig.

Sorry, I have sigs and avatars diabled. Work

[MATR6]

Originally posted by boroEF
15.1 with just a program and intake??? props

Thanks!
Yeah, intake and chip, pretty cost effective mods I must say.
Well, spending $700, ~$200 for AEM CAI and $500 for Unichip isn't bad for the results I got.

I got the Unichip at a discount, it retails at $750. Bought it off some guy on Matrixowners.com. It was new and unprogramed, he didn't use it on his turbo Matrix.

[MATR6]

Originally posted by Deep
Sorry, I have sigs and avatars diabled. Work

No Prob, I didn't even know you can disable sigs and avatars.

[92CAMRYGTS]

get some good tires and get that 60' down a bt and you'll be in the 14's.

[SmokingTires]

^
Well yeah. If you get your 0-60 down, I'm guessing the car would be going faster.

Originally posted by kasimmmmm
wow! impressive! Manual makes a BIG difference! With that 1/4 time, you can take out a V6 accord...and a V6 camry.

Maybe your Gen It would be behind me at the finish line