7M-GE '86 Hose Connection Problem

[psupra]

Hi everyone,
I've been working on my '86 Supra lately, I had to change the head gasket and now I'm pretty much done, expect I'm unsure about some of the last hose connections.

Problem #1:
The hoses running along the back of the engine bay. I'm unsure which hose to connect to the bottom end of the little T-PIECE.




Problem #2:
The valve under the intake plenum on the right of the engine. There is a round-looking valve and I don't know which hose connects to it.



If anyone could please let me know.
Where can I find them and where do they come from?


Thanks
-Pascal

[Jeeves]

The light is realllly bad in that second pic, so I can't quite make it out, but this should help:
http://www.cygnusx1.net/supra/librar...es/MA8829B.gif

As for the top photo, I don't have my car up at the moment so I can't check, I remember it T-ing.... I'm just trying to remember to what...

I think THIS page has the answer though:
http://www.cygnusx1.net/supra/install/vacuume_hose.html

Read side if intake manifold to T junction at back wall.
Small join from T junction at back wall to hard line leading to passenger side.
T junction at back wall to 4 way T at Cruse Control.
Cruse Control actuator to "ACT" connection on Cruse Control pump.
4 way T at Cruse Control to "VAC" connection on Cruse Control pump.
4 way T at Cruse Control to Cruse Control switch.