Post Supra Interior Pics Here!

[ddouglas77]

I think it is time to show off our interiors, don't you? Something custom, shiny, smart or even 100% OEM, post 'em!
I'll start with my first interior investment: Vac/Boost Gauge, A/F and Volt meter A Pillar cluster. Unfortunately, the PWM was on and the camera couldn't see the readings, but you get the point, still needs to be fully installed and guages straightened, but this is an awesome starting point.

[mk2-1jz]

1985 Supra

[ddouglas77]

Originally Posted by mk2-1jz

1985 Supra

Sweet and subtle! I love those dash lights!

[funky_monkey58]

I will post some pics when my custom black interior is done. And I am not talking about paint either.

Custom leather ftw.

[Jeeves]

I've never prided myself on the interior being clean, only being functional.

[img]http://www.**********s.com/supra/mk3_interior_1.jpg[/img]
[img]http://www.**********s.com/supra/mk3_interior_3.jpg[/img]

[img]http://www.**********s.com/supra/mk3_interior_2.jpg[/img]


With my piggyback harness in there next to the stock ECU I have yet to figure out a great way to get the glovebox back in there. Especially since I have the following in there:

- Piggyback Harness
- TCCS ECU
- MAFT Pro ECU
- Wideband "ECU"
- Zeitronix ECU

It's a LOT of stuff to cram into that cubby hole and put that cover plate in there. Thank the lord I have a real garage.

@Douglas, what gauge do you have that reads PWM?

[midwestmk2]

Im not so subtle,Lol... Definitly my own custom touch..
That was a pair of my wifes old Red leather pants..

Another shot of the whole interior..

My own custom Swich pods..

[Jeeves]

Jesus now I feel retarded. No more posting at near 1am for me. I got Duty Cycle and PWM mixed up.

If you have a DSLR & a tripod you can get around the refresh rate issue.

[ddouglas77]

Originally Posted by Jeeves

Jesus now I feel retarded. No more posting at near 1am for me. I got Duty Cycle and PWM mixed up.

If you have a DSLR & a tripod you can get around the refresh rate issue.

That sounds expensive just to take a picture of a blinking led

[Jeeves]

Originally Posted by ddouglas77

That sounds expensive just to take a picture of a blinking led

Well, I didn't say -buy- that to take the picture :-P
I really hope that's programmable and not coming off your narrowband sensor.

[Jeeves]

You're either posting for the rest of the forum or you forget who I am/what I run I know, trust me, I haven't tuned for stock hardware in quite a while. I was just checking. I largely consider those things to be LED Lights shows and or a waste of $$$.

[Jeeves]

I was simply referencing the fact it is basically a 14.7 stoichiometric switching point, hence a light show, nothing more. This thread has gone way OT, my apologies.
[img]http://xd.**********s.com/uploads/6abb35d801.jpg[/img]

[ddouglas77]

Originally Posted by Jeeves

I was simply referencing the fact it is basically a 14.7 stoichiometric switching point, hence a light show, nothing more. This thread has gone way OT, my apologies.
[IMG]http://xd.**********s.com/uploads/6abb35d801.jpg[/IMG]

I understand where you're coming from and I know why you are using a wideband. For me, the wideband isn't worth the money till I replace the ecu. For now, increasing the boost, the narrow will work just fine for me without the added expense. I'll delete this posting after you delete the others so that this doesn't get too far OT and I'll start a thread on "Neccessary Guages" and we can pick up from there. We know, but some might not and might find the info very useful. Besides, I could charge some acid dropping hippy for the light show:P

[SupraTuned]

My interior is stock right now, probably won't go far past functional additions. I don't like to pretty up interior and make it ricey. Those are my amplifier RCA's in the passenger seat, and there is also a programmable monster auto meter monster tack laying close to the seat, if anybody was wondering what the wires were.

[willtotheumm]

So far off topic that it's scary yet funny.

My Supra is incredibly stock and clean haha.





Anybody have a good grey glovebox they're looking to get rid of? Mine is broken

[ddouglas77]

Originally Posted by willtotheumm

Can't help you with the glove box, but you need door sills like I do, I like these that I found... http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=