85 Lph walbro pump in an N\A.....

[MR-355-5sfTe]

*EDIT* 255 LPH pump

my stock fuel pump is acting like it's gonna quit anytime now... I've noticed an odd "buzzing" sound coming from it's general location, and last night leaving work... it was running horribly... it would shutter, sput, pop.... and then start to cruise normally... then it would start all over again...
I got to a gas station where I filled it with premium and added an "octane booster"... it was still running like crap until about 10 miles down the road when it suddenly quit. it ran fine on the way to school today... and I was wondering if I just had some bad gas \ trash in the tank\ or failing pump....
I wouldn't mind replacing the pump anyway, it's almost 13 years old. would the stock pulsation damper\regulator compensate for the fuel flow of the walbro 255 lph pump?
or can anyone recommend where I could locate a stock replacement? ASIDE from toyota!
thanks guys

[clem]

Try a Denso fuel pump its a stock pump and its good! The only reason reason that u swap out stock fuel pumps and innjectors if your planning on building serious horse power. The Denso pump part number is 950-0152 .

[MR-355-5sfTe]

yeah, I had a walbro pump for my 5sfte build... but I sold all of the components a while back... now I am wondering if I can use one on my stock 5sfe\3sfe....

[MR-355-5sfTe]

I just checked on the stock replacement.... $149 + shipping.... the walbro is $100 with free shipping... just worried about fitment\useage.