How do I change the bulb in one of my fog lights - Toyota Nation Forum : Toyota Car and Truck Forums

clem · 12-07-2005, 02:56 PM

One of my damn fogs r blown and i have no idea how to change the damn thing so can someone help a brother out!

JekylandHyde · 12-07-2005, 03:06 PM

Curious why you always select "Gen3" for your thread titles?
You have Gen2 Mr2?!

As for the foglight, there are 2 screws that hold the assembly onto the car.
You pop them out (probably rusted in and will need to be drilled with a 6" + drill bit).
Once the asembly is in your hand, the back twists open to get to the bulb.

Replace the bulb.

clem · 12-08-2005, 07:29 AM

thanks

Piddy · 12-08-2005, 01:01 PM

Soak those bolts up with some PB Blaster before you try and pull them out. The rust can get pretty heavy.

Quote:

Originally Posted by JekylandHyde

Curious why you always select "Gen3" for your thread titles?
You have Gen2 Mr2?!

As for the foglight, there are 2 screws that hold the assembly onto the car.
You pop them out (probably rusted in and will need to be drilled with a 6" + drill bit).
Once the asembly is in your hand, the back twists open to get to the bulb.

Replace the bulb.

I think he thinks he has a Gen3 motor. Which isn't very likely on a '93 shipped from Japan.

***MRQtwinturbo*** · 12-08-2005, 02:16 PM

his car is JDM yo........lol.......

also remember to put some grease onto the screws to prevent them from rusting out in the future..i did these to mine and have never had a problem taking them on/off..