Need YOUR help!

[Drifting Dane]

Got my car back, pics up soon, but im trying to install my AVCR... where is the factory boost control solenoid valve??

I coudnt find it for the life of me.

I know how to hook up the rest of it, pressure sensor and ecu wires... but there are two things i need to find, that boost control valve and the actuator itself... i cant find either.

any help guys i need to have this thing up by monday, thanks in advance.

[Drifting Dane]

Nobody at all is willing to help me? I found the actuator (what i thought it was but i wanted some reassurement) but I still havent found the factory boost control solenoid.

SOMEONE out there must have some experience with this! A link to a site? Anything?

EDIT: here is a pic for your helping convenience ^_^

[JekylandHyde]

The is no factory boost solenoid.
There is a factory T-VSV (turbo vacuum switching valve).

If you are adding a boost controller, you will most likely have to cap the line going to it.

There is a vac hose that goes from the turbo to the wastegate actuattor (on the left nipple of teh actuator). The hose on the right nipple of the actuator goes under the engine to the T-VSV.

[JekylandHyde]

Originally Posted by Drifting Dane

Nobody at all is willing to help me?

Maybe you could give people more than 12 minutes to respond.

[Drifting Dane]

Originally Posted by JekylandHyde

Maybe you could give people more than 12 minutes to respond.

Well Jeff, i had made the initial post about 2 months ago, and i had no responses.

Thanks so much for your help! I think i can finally install that baby.

[Drifting Dane]

Ok just to make sure, does this look correct? sory for the crappy paint application.

[Drifting Dane]

sorry, im just so paranoid about doing this right. i cannot afford to mess this up.

[BDSL]

Correct!

[Drifting Dane]

woo hooo alrighty then! i should have this hooked up soon! Thanks for the help!