increase displacment benifits

[highwayinthesky]

hey i had my 93 turbo for about 2 years and was looking at options for inceasing hp, mostly i was wondering if anyone had any luck building a lowcost stroker from factory toyota parts. i am a four wheeler as well and have a 383ci in a 91 s10 and was wondering if you could swap the cranck and rods out of the NA motors and use turbo pistons to keep the compression down in the motor. i have tryed other sites with no luck and have read pages of search results and would like a fast accurate answer.

-thanx-

[JekylandHyde]

There are several companies that are making stroker engines out of 3SGTE blocks using the 5SFE crank.

I have one in my car

[highwayinthesky]

thankyou vary much i will contiue my search for a stroker kit, but was mostly woundering if anyone has built one themself? and if so what amount of machining had to be done?
thank you again

[NESW20]

i built one myself. i used a 5SFE crankshaft in a 3S block with 3S rods and special pistons. the only machine work that **has** to be done is turning the crank down to accept the 3S rods. otherwise, you could get custom rods that will fit the 5S crank rod journals.

email me or PM me if you'd like some more info.

-Mike