you should be able to find the adaptor.
If you want a custom pipe, a friend of mine runs a tuner shop in town and has a mandrel bender in-house. If you want a nice, custom pipe I may be able to hook you up.
You would be able to choose diameter, length, angle, BOV location, completely customizable. It probably wouldn't be the cheapest though but with me doing it, fitment, form and function would be A+. (you don't have to give me dimensions, you could just tell me what turbo, manifold and I/C you're running and I could make it)
When I get my MF license straightened out I'm going to be doing a lot of this type custom work up there. I'm very much looking forward to replacing my I/C pipes with 2 full one piece's. Hopefully be able to find a place to do black chrome too!
__________________
WANTED: Gen 3 3SGTE Igniter & resistor packs, MAP sensor, T-top shades (black), beat up strut bars (or cheap),
Border vented C/F hood
FOR SALE:MR2/3SGTE - cams, fuel rail, 440's, flywheel, more:
http://www.toyotanation.com/forum/sh...33#post1287233
Forum for every generation Toyota MR2. Including the AW11 and SW20.
Linear Mode
