3rd gen 3sgte - Toyota Nation Forum : Toyota Car and Truck Forums

supermanwithhea · 01-07-2007, 07:10 PM

aright heres my question. I dont know if this has been asked before and im sorry if it has and it bothers you but, i wanted to know, will the 3rd gen 3sgte from an all trac celica fit into a 2nd gen mr2. and if so, will the water to air intercooler be a problem?

***ModifierMR*** · 01-08-2007, 02:23 AM

yea a 3rd Gen 3SGTE will fit fine, Id suggest you get the Side mount MKII intercooler, but you could get away with the top mount intercooler that comes with the engine

MR. 2Lanes · 01-11-2007, 09:32 AM

I say stick with the Water to Air, just so you don't have to do any modifying down the road when you'll want one.

Get a bigger core and stick with it, cause it sure as heck won't heatsoak as much as a sidemount would due to the water.

CompanyFlow · 01-12-2007, 07:30 PM

Or you could buy a cheap windshield washer squirter and rig it up to your sidemount and soak it ^^.

tHa kNiGHt FaLL · 01-12-2007, 07:37 PM

if you can get your hands on a gt4, i say scrap the project and buy the car... those things are bad as fuck...

supermanwithhea · 01-13-2007, 12:07 AM

i wish i could get my hands on a 6th gen all trac, thats like my dream car. i only want to start on the mr2 because its cheaper then shipping an all trac, plus its to rare to come across so i might have to weight a few more years for people to start selling them off more in japan or the uk.

tHa kNiGHt FaLL · 01-13-2007, 03:04 AM

Quote:

Originally Posted by supermanwithhea

i wish i could get my hands on a 6th gen all trac, thats like my dream car. i only want to start on the mr2 because its cheaper then shipping an all trac, plus its to rare to come across so i might have to weight a few more years for people to start selling them off more in japan or the uk.

i've seen em in california... like twice i think... if you look hard enough...