3sgte wiring help with pics

[MyFreeCamry]

So I have already posted this on mr2oc and nobody has answered me yet. I just purchased this from a seller and a few connectors don't seem like this is a 3sgte 91 turbo engine harness. Here is the link with all the pics: http://mr2oc.com/showthread.php?t=328516
Can somebody help me and verify that it is a 91 mr2 3sgte engine harness? Thank you.

[MR2Jedi]

In photo #7(1st post), the plastic piece, I think there should the wire and connectors for the 02 sensor and IC fan. I don't see them...The plastice piece it's self looks different than my '91 Turbo.

[MyFreeCamry]

thats one of my concerns. So far on the wiring harness and tracing with diagrams I have located the knock, cold start, and tvis connector. The injectors I thought should be a no brainer but refering to the bgb its not. All four injectors connectors or at least what I believe are for the injectors are all the same wiring on the harness - white and black/red. does any of the other main ecu connectors look right, it doesn't to me comparing to the bgb.

[MR2Jedi]

Here's a pic of the part I was refering too. It's definately different and missing the 2 connectors I mentioned.
I'll take a look at my schematic and see if the ECU plugs match.

You can see the cover is different and has 3 wires/connectors coming out of it. This goes over the valve cover on the passenger side of engine.




And the three conectors. The larger white one goes to the I/C-engine compartment fan. The large brown one to the O2 sensor. And the small white one is for the A/C.
Hope this helps

[MyFreeCamry]

it does alot. thanks a million. he refunded me my money and i am returning it to him.

[MR2Jedi]

Good. I'm glad you didn't get burned.
If you're looking still for a Harness, PM MR2 Guru. He's parting out. He may have one. Won't hurt to ask. Tell him I sent you.