I'll try to get some update photos tomorrow.... just recently got in, finally took it on a quick test drive.... feels like the ignition is off a bit and I need to play with the cam gears, but.... lets see here...
how many different vehicles does it take for me to get the car on the road after 2 years? LOL
the block is from a 93 corolla 1.8
the crank is from?
3 rods are from the 93 corolla 1 is from?
the head is from a JDM smallport 4age
the intake manifold is from a different JDM smallport 4age
the intake cam cover is from an ae101 4agze
the exhaust cam cover is from an ae92 prizm gsi
the center valley cover is from a JDM smallport
the header is from the 87 mr2 (came with it, modified to clear the 7a)
the oil pan and pickup are from a 94 prizm
the passenger axle is from an 86 mr2 (same with the transmission)
the driver axle is from???? probably a different 86 mr2, but unsure as I have a stack of them
the megasquirt was meant for the ae92, but never got it
the cam gears are from Japan and used, unsure of history on them other than that
the coilpack is from a dodge neon
the edis wheel and sensor is from a ?? escort, the module is from a different escort
one of the shift cables is from a different 87 mr2
the brake master cylinder is from one of my past 86 mr2's that I parted out
the seats are from my current 86 parts car
the interior was 1/2 swapped when I got it -- 1/2 blue, 1/2 black
and somehow when I did the exhaust I managed to use 7 clamps in a ~4 foot section