exhaust flanges

[Tercel GTS]

where is the best place to source both flanges for a stock 91 MR2's turbo and the exhaust manifold to block flange? Going to let a friend in the muffler business make a custom header and downpipe to give a little extra room in this tiny bay.

[Tercel GTS]

http://koracing.net

[arcasmachineracing]

My friend Jimmy is actually installing a KO Downpipe right now... haha, he'll be over in just a couple, I'm gonna have to check it out.

[Tercel GTS]

I have to make my own as I'm installing to a 93 Tercel and room is really tight.

[MRQtwinturbo]

a 3" downpipe is overkill unless he is upgrading to a bigger turbo....and all it will create is a bottleneck if the rest of the exhaust piping isn't 3'' piping also.....

[Tercel GTS]

I doubt I have room for 3" to be honest. I intend to run 2.5 all the way out so that'll prolly be my target. I can see a better wheel in the turbo, but truthfully I can't see room for larger housings. Also I can't see a street driven FWD capable of using more than 300hp.

[mr2blackna]

[qoute]Also I can't see a street driven FWD capable of using more than 300hp.[/qoute]
this guys is insane....
http://www.jdmuniverse.com/forums/sh...threadid=21507

[Tercel GTS]

Hehe, well ya see he has to put slicks on to make use of the power. Imagine what it's like on the street. Axles seem to be my barrier at the moment.