turbo swap - Toyota Nation Forum : Toyota Car and Truck Forums

lil' zipper · 07-16-2005, 08:51 AM

Ok, I've read some of the forums on what to do with a swap. I have a 2200 motor and I have the 2000 turbo. The mechanic said that my 2200 tranny will fit on the 2000. Now, I tried to go on this web site http://www.board.mr2faq.com/ but I can not get in. All I'm asking for is the vaccum diagram. Which is pretty much all I can think of right now. I'm a little bit of a noob, but I'm gonna need all yours help. I'm open to suggestions.

JekylandHyde · 07-16-2005, 11:45 AM

The MR2 board has changed it's address. You will find it here: www.mr2oc.com.

Yes, your 2.2 tranny will bolt up to the 2.0 engine.
However, that does not mean you would want it to.
The gearing is set up for an entirely different power.

Good luck,

lil' zipper · 07-17-2005, 02:15 AM

Thanx for the info. Maybe I will be able to crack this mystery. I'll let you know how it goes. All i need to do is bolt the tranny, and figure out the wiring and vaccum lines. It took me pretty much the whole day to take out the motor. I'll catch up with you later.