mitsubishi?? - Toyota Nation Forum : Toyota Car and Truck Forums

nepopolus · 09-06-2005, 09:44 PM

i know you guys may hate me for this but have you guys ever seen a 4g63 put into a 90 to 95 mr2? jsut wondering cause i am a former dsm owner and have a 1998 gsx engine that i could get to put in it but i dont know if i could get it in there. u guys got any ideas?

Mike@Fidanza · 09-06-2005, 09:50 PM

I'm sure it could be done. But why would you want to do that? It would take waaaaay toooooo much work than what it's worth.

nepopolus · 09-06-2005, 10:57 PM

well i am basically looking for a diffrent engine because i have a 5sfe that has got 120k miles on it and this is the first i found and dsm have a very high power output to what i have seen
eaither way i was going to buy a engine put most the upgrades out of it get all i can out of the 5sfe and swap the new engine when my engine dies or i feel there is a good amount on the engine i could jsut get a 3sfe from japan for about 2000 or i can get a crappy engine from a eclipse or mr2 and just rebuild it from bottom to top

toyotaspeed90 · 09-07-2005, 01:48 AM

i believe Bill Strong over at mr2oc.com has a mk1 with a 4g63t in it.... i'm pretty sure that guy has or has had just about anything you can think of....

ToyotaTechGeek · 09-07-2005, 08:09 AM

i've seen one done in a MkI...i ran that thing ragged

Pineapple · 09-07-2005, 08:17 AM

Quote:

Originally Posted by nepopolus

well i am basically looking for a diffrent engine because i have a 5sfe that has got 120k miles on it and this is the first i found and dsm have a very high power output to what i have seen
eaither way i was going to buy a engine put most the upgrades out of it get all i can out of the 5sfe and swap the new engine when my engine dies or i feel there is a good amount on the engine i could jsut get a 3sfe from japan for about 2000 or i can get a crappy engine from a eclipse or mr2 and just rebuild it from bottom to top

Get a 3S-GTE with tranny, ECU and wiring.

QuadCamSix · 09-07-2005, 12:18 PM

If it fits in a MKI it WILL easlily fit in a MKII

nepopolus · 09-07-2005, 03:53 PM

well now that i know it fits do any of you know how hard it would be to get in?

toyotaspeed90 · 09-07-2005, 03:53 PM

^^^ i believe that is bill's car......

ToyotaTechGeek · 09-07-2005, 10:46 PM

no. i saw it up in Canada. and it runs...

so it can't be bill's car!!! LOL

QuadCamSix · 09-08-2005, 12:51 AM

Quote:

Originally Posted by nepopolus

well now that i know it fits do any of you know how hard it would be to get in?

A sledge hammer, dimond edged angle grinder and, wire welder would all help.

ToyotaTechGeek · 09-08-2005, 08:00 AM

Quote:

Originally Posted by Pineapple

Get a 3S-GTE with tranny, ECU and wiring.

believe me when i tell you it takes a HELL OF A LOT MORE THAN THAT!!! to get a Mk1.5 going.

oh and those pics are from the Canadian guy from last year's IMOC meet in Canadia.

SpeedballTrix · 09-08-2005, 11:03 AM

How much power was it making?
I know those things can make some pretty serious power.
(I would still prefer the clean band of a Toyota mill, but hey, the more horses the better =P)

nepopolus · 09-08-2005, 05:54 PM

it is a stock gsx motor it jsut had alot more possiblitys then a 3sgte because there is alot more stuff out for that engine

Piddy · 09-08-2005, 06:00 PM

Quote:

Originally Posted by nepopolus

it is a stock gsx motor it jsut had alot more possiblitys then a 3sgte because there is alot more stuff out for that engine

Thats a bull shit comment. There is plenty of aftermarket for the 3sgte.... you just can't be a cheap ass. If you want cheap power go back to Mitsu or buy a Honda. There are TONS AND TONS of cars over 400hp..... a good amount over 500hp.... and a handfull over 600.

I'm posting this picture knowing everyone hates extremeboost.... but they still deserve the respect.