Any one have experience with this?

[DR.2]

So i just got my car back for the first time friday. And when the turbo starts to spool alittle the car kinda jerks. and when it totally spools it gets worse. My friend let me test his apexi twin chamber bov and the jerking went away kinda. it was still there when u steppeed on it in like third. when u beat on it, the car barley jerks. i think it might be the plugs and wires. so monday im getting all new ones. and today i put the stock bov or wastegate im not shure u would call it back in place of the apexi and its alittle worse. so i went over it again and its all connected right. so untill i get my wires and plugs i wont know for shure. from what i get from past posts stock wires and plugs are the best? i might get he 8mm i dont know. is the stock that much better? any input would be aprciated.

-chad

[JekylandHyde]

It sounds like ignition or a boost leak.

I would get TOYOTA cap, rotor, wires and plugs.
See what that does for you.

I would recommend using the factory BOV set up correctly.

[DR.2]

yea im ordering all that stuff monday.

and for the stock one. i saw in the past that you gave the advice on it. can u better explaine it to me. and how to set it up right. i have a 91 if that makes a diff.

thanks for the help.