92 Toyota died on the road now wont start!!!

[big_boy_toy]

92 toyota pickup V6. Was driving down the road and the engine light came on and just died. Turned over and nothing.. so on further investigation, I am getting spark, i am getting good fuel pressure all the way to the fuel rail by the intake manifold. I was looking at the Haynes manual and it steared me to the VSV. The valve works fine when applying 12v however when I took a reading from the connector that goes back to the On board computer there is no output.

any input would be great thx!!

[fourwd1]

In some cases the ECM provides a ground to complete the circuit, not +12V. That can fool you.

Have you checked the ECM for any error codes?

Which VSV?