Wrapper

[81toytruck]

lagarto, yes this part was the cause of the leak. Replacing it has allowed the engine to idle at 800rpm.

ironworks,
there was a pull off for the choke in the kit, but it was not the one that failed. Can't seem to get the pic to post, I'll provide a link. After the carb rebuild, this one would not hold a vaccuum. When I plugged the vac line to it, it idled just fine but would not kick down on its own.

http://shop.advanceautoparts.com/Pro...rtNumber=VC737

A new one of these did the trick.