|
Knock sensor question
I've finally gotten my knock sensor out of my '93 V6 (big pain in the ass, but kinda fun as well) and I'm wondering if it's possible to test it with a DMM or something to see if it's actually ok. Also, just out of curiosity, does anyone out there know why the wiring harness has two wires at one end but only one wire at the other? I've heard people saying to replace it as well just to be sure that it wasn't the problem in the first place, but I tested the resistance of the black wire that goes all the way from end to end and it was an ohm or two so I know it's not broken. I don't know how to test the red/orange one though because I don't know where it ends.
|
Linear Mode
