I have a 2006 Sienna LE with Homelink system.
I have a rolling code garage door opener so I am following the guide below to program the homelink in my Sienna.
http://www.homelink.com/images/hl_manual.pdf
The problem is that the programming doesn't work.
I tried by first erasing any codes by pressing 1st and 3rd homelink button for 20 sec till it starts blinking.
Next I press the training button on the garage door opener motor head unit.
Then I press the 1st homelink button and keep it pressed waiting for the flashing light to become solid. DIDN'T WORK.
So I Repeated the process by removing all codes, pressing training button on motor head unit and trying by pressing 1st homelink button 2-3 times as the above guide states. DIDN'T WORK.
I tried with ignition key turned to the second position but car OFF.
Is there anything else I need to do?What am I missing?
Linear Mode
