06-10-2009, 04:00 PM
|
#9 (permalink)
|
|
New TN User
Join Date: Jun 2009
Location: VA
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
Originally Posted by SaganGathering
Camry noob here.
I'm not sure how to tell if i have a "California" spec'd car (the car was sold new in New York State). How do i tell?
Can somebody please cite the proper A/F sensor pin numbers to test for a 2001 Camry?
Somebody elsewhere gave wire colors, but we all know that wire colors can be unreliable guides. Also, if i do have a California spec'd Camry, do i need a particular variant of the Air/Fuel sensor? I rather suspect that for best performance, that i would. (The current A/F sensor is marked Denso Toyota)
Finally- it looks like there's a shield on the manifold (held on with 2 screws) that needs to be removed before i can attempt to remove the sensor (if proven to be bad). I don't have any auto tools (in fact, my tool selection is embarassingly small) . What can i use to get unscrew the A/F sensor? If i had access to the right tool i don't think i'd need to remove that shield first.
|
|
|
|
