Quote:
On 2002-04-06 16:06, Shaun wrote:
Quote:
On 2002-04-06 03:05, DaksGT wrote:
Quote:
On 2002-04-05 17:13, Shaun wrote:
Quote:
On 2002-04-05 12:19, TOM'S CAMRY wrote:
Quote:
On 2002-04-04 18:43, Shaun wrote:
who cares, vtec is the best :grin: :grin: :grin:
|
Yeah!
Make sure is DOHC VTEC, not SOHC VTEC!
Shaun, when will you put the VTEC engine in your EF9?
Calvin
|
ehhhhhhh first of all, i dont have SOHC vtec, SOHC engines are for pussies :smile: i wont ever put a b16 in my car unless i'm loaded on money..even then, a b16 is much heavier than a zc, and will mess up my car's handling. i'd much rather get a turbo!!!! *droool* wot bensa said :wink:
|
Bite your tongue.
I've seen many a d16z's that could rip your ZC a new a-hole.
My girlfriends being one of them :wink:
|
depends in what car...eg? thats a bit heavier than my car. ek, even heavier. ef? then thats fastt lol. my buddy that has a stripped ef, with the sohc vtec, i/h/e ran 14.8!!!
|
Thats very hard to beleive, u need at least some sort of a cam to get you to those times, cause a guy i knew in a crx with a cam, cold air intake, full blown exhaust, headers and a 12 degree valve job and some other internal work did 15.2 and he was stripped down as well.
I have no problems with EF's with the sohc setup, I usually pull very hard of the launch and as the speed gets higher and higher it keeps on getting worse and worse.
My g/f has a 2000 si coupe, just wait till august :wink:
