WIRE harness

[dunn4life2]

Hey,

So i am trying to install a new radar dectector in my 07 tC and i really don't want to run wires all the way down to the fuse panel. I Was wonderin if someone could help me out with finding out which wires on the sunroof control/map light harness were the ignition and ground wires

[wonger]

have a volt meter??

[dunn4life2]

yeah... i'm an electrican... its the fact that the connections in the terminal at the end of the harness are too small... its a long shot... but i just figured i'd ask if neone had a diagram of the harness

[wonger]

those wires are suppose to be small. they where not made for you to tap into and hook other stuff to..

but u can get the battery operated radar detector.. cost more but its a nice one.. forgot the name..

[Driver]

Originally Posted by dunn4life2

Hey,

So i am trying to install a new radar dectector in my 07 tC and i really don't want to run wires all the way down to the fuse panel. I Was wonderin if someone could help me out with finding out which wires on the sunroof control/map light harness were the ignition and ground wires

Your car has two cigerete lighters. Just tap into one of them. I have tapped into the one next to the shifter. I installed one of those devices that allows me to run four other devices. It's been working pretty good.

[dunn4life2]

Originally Posted by Driver

Your car has two cigerete lighters. Just tap into one of them. I have tapped into the one next to the shifter. I installed one of those devices that allows me to run four other devices. It's been working pretty good.

Yeah, thats wat i ended up doin... but i was trying to avoid running the wire down the a-pillar and into the console

[dunn4life2]

Originally Posted by wonger

those wires are suppose to be small. they where not made for you to tap into and hook other stuff to..

but u can get the battery operated radar detector.. cost more but its a nice one.. forgot the name..

Its not the wires... its the terminations... the wires look like 20awg

[dunn4life2]

Yeah, i just ran the wires down to the cigar plug and tappin into that circuit