New AFM!!

[Mushroom_Toy]

Well I just thought I would post a pic of the new AFM I got today. It's a lot bigger than the one in the truck as you can see in the pic. The best thing it's a Denso AFM, so just plug and play, with some tuning of course. I should have it in in the next couple of weeks, when I should do the battery/air filter location swap. The AFM came off of a 1993 Mazda 929.


Mazda AFM on top, small dinky stock Toyota AFM on bottom.

[Mushroom_Toy]

Yup hopefully it will. I just have to find some bigger clamps to connect the AFM to the piping. Also have to find an adapter for this AFM or make one, seeing as the overall size is just bigger than before.

[JetspeedCamry]

What motor is this running? If it's the 3VZ-E, it uses the same AFM as the 2VZ-FE. If so, how would you tune it..? If it works out, i might be interested in trying it myself.

[Mushroom_Toy]

^ JetspeedCamry, actually I'm going to be running it on the 22RE. Because the AFM is small, puny, and gay. Seriously though the AFMs on 22RE engines are a bit on the small side, and this will just be plug and play, since its a Denso Japan part. To tune it persay you have to cut the silicone on the top, open it up and turn the teeth a certain number of times, too far in one direction and your either going lean or rich. I'm not sure if these will be plug and play for the 3VZ-E or the 2VZ-FE or if they will even work. If you have a AFM similar to the one in the pic on the bottom (my stock Toyota one) then chances are you can get it to work if the plugs are the same. I was going to use an older Supra AFM, but the Mazda ones are even bigger in diameter, so I chose this one.

[Knailgun]

nice score......good use for a mazda in my opinion

[RedPhoenix]

ooo cant wait to see how the truck comes out

[Mushroom_Toy]

^^ Who woulda know Mazda's gonna help me produce a little more power lol.

^Yeah hopefully I'll have everything started soon, just having some trouble finding time to do it in.

[dna59]

Keep us updated on how it performs