Some yodapro I am, tried to start my truck without the rotor on!

So this is what really happend.

I was checking the point gap and forgot to replace the rotor, tried to start the truck when !POP! I blow 2 fuses (replacedeverything). So now I get limited power to my dash and no power to my "starter?". So I fiddle some and find my hzards work, but not at first, the relay clicks rapidly then seemed to reset itself and work properly(key is off). So I turn the key to acc and I have power but alt light comes on too. So I try to start it anyways and !POP! again, now I get nothing! Any ideas on where to start? I already checked the starter ,its ok.