New Member-Hello from NY

[499/506]

My daughter owns a 2006/2007 Yaris and recently had a accident.The front bumper was torn off and all the plastic is missing.There is no structure damage but will need a bumper cover ,fender,headlights and a lot of plastic parts.My main questions to you guys are were can I find a diagram of how the front end parts go together so we can figure out what parts will be needed,can the headlight tabs be glued back on(not sure what type of plastic these are)and your advise on Toyota or aftermarket as far as the fender and bumper cover .Also I will need all the fasteners.Thanks Dan

[RningOnFumes]

Hi,

Welcome to TN. I've sent you a message.

Fumes.

[jonmrehouse]

hello from clifton park ny, about 10 mins away. crash parts will prob need to come from toyota, as i doubt anybody makes crash parts yet. try keystone auto, on karner rd...
as for a diagram- it just goes together... you should be able to find a shop manual pdf online... or talk to toyota dealer, they could probably print you the diagram you need.
for the push pins that conect everything, the ones toyota uses are a pain in the butt. go to a NAPA or other parts store and look for the "christmas tree" ones, or the push only ones...

best of luck and let me know if you run into any problems.

oh- and to glue the plastic tabs. you may be able to use a 2 part plastic specific adhesive, but i don't know if it'd be strong enough... NAPA carries a product called fusor, and most places that carry autobody supplies could do the same...
-jon