Replace valve body on A541?

[email]johngdole@hotmail.com[/email] wrote:[color=blue]
> rid the metal shavings from the pan,[/color]
================
Any metal particles in the pan should be trapped and held by the
permanent magnets

(The magnetic particles are iron/steel and indicate gear wear; the
non-magnetic are copper based and indicate bushing wear.)

Yeah, the machine won't wipe the magnets or the pan is the problem. And
magnets are less effective when already coated. BTW it would be
interesting to drop the pan and see what's left in the pan especially
after the first flush.

IMO, dropping the pan, changing (not cleaning) the strainer, and wiping
the pan and magnets is the proper way to clean off these magnetic and
non-magnetic particles. "Flushing" is more appropriately called "fluid
exchange", and is more economically accomplished with regular drain and
refill.



Daniel wrote:[color=blue]
> [email]johngdole@hotmail.com[/email] wrote:[color=green]
> > rid the metal shavings from the pan,[/color]
> ================
> Any metal particles in the pan should be trapped and held by the
> permanent magnets[/color]