84 Corolla timing

Lost emission sticker on 84 Canadian Corolla.
Can anyone tell me what the plug gap and ignition
timing should be.

On Fri, 20 May 2005 23:43:15 +0000, Cosmopolite wrote:
[color=blue]
> Lost emission sticker on 84 Canadian Corolla.
> Can anyone tell me what the plug gap and ignition
> timing should be.[/color]

Um, which engine? 4A-GE Timing ~8DBTDC

Hachiroku wrote:[color=blue]
> On Fri, 20 May 2005 23:43:15 +0000, Cosmopolite wrote:
>
>[color=green]
>>Lost emission sticker on 84 Canadian Corolla.
>>Can anyone tell me what the plug gap and ignition
>>timing should be.[/color]
>
>
> Um, which engine? 4A-GE Timing ~8DBTDC
>[/color]

Right, forgot the most important piece of info.
It's a 4A-C.

Cosmopolite wrote:[color=blue]
>
> Hachiroku wrote:[color=green]
> > On Fri, 20 May 2005 23:43:15 +0000, Cosmopolite wrote:
> >
> >[color=darkred]
> >>Lost emission sticker on 84 Canadian Corolla.
> >>Can anyone tell me what the plug gap and ignition
> >>timing should be.[/color]
> >
> >
> > Um, which engine? 4A-GE Timing ~8DBTDC
> >[/color]
>
> Right, forgot the most important piece of info.
> It's a 4A-C.[/color]

I have an American (Federal) 1987 model with a 4A-C. My Haynes (1980-87
Corolla RWD models) manual lists 5 deg. BTDC and 0.044 in. gap. for the
4A-C, Canadian models included. (I've used both of these specs. with
success.) Also, they list the plug type as ND W16EXR-U11 or
equivalent. (ND = Nippon Denso[?]) My emissions label is faded and
parts of it are hard to read, but I'll try to check it soon, and I'll
post back here if there's anything to add. I need to get out there and
work on the car anyway.

Stephen

Stephen Bendzick wrote:[color=blue]
> Cosmopolite wrote:
>[color=green]
>>Hachiroku wrote:
>>[color=darkred]
>>>On Fri, 20 May 2005 23:43:15 +0000, Cosmopolite wrote:
>>>
>>>
>>>
>>>>Lost emission sticker on 84 Canadian Corolla.
>>>>Can anyone tell me what the plug gap and ignition
>>>>timing should be.
>>>
>>>
>>>Um, which engine? 4A-GE Timing ~8DBTDC
>>>[/color]
>>
>>Right, forgot the most important piece of info.
>>It's a 4A-C.[/color]
>
>
> I have an American (Federal) 1987 model with a 4A-C. My Haynes (1980-87
> Corolla RWD models) manual lists 5 deg. BTDC and 0.044 in. gap. for the
> 4A-C, Canadian models included. (I've used both of these specs. with
> success.) Also, they list the plug type as ND W16EXR-U11 or
> equivalent. (ND = Nippon Denso[?]) My emissions label is faded and
> parts of it are hard to read, but I'll try to check it soon, and I'll
> post back here if there's anything to add. I need to get out there and
> work on the car anyway.
>
> Stephen[/color]

Thank you for the info.