Re: Replacing timing belt

Michael & Julie-Anne Kunde wrote:
[color=blue]
> Hi
> I'm hoping someone can help me. I have a 1984 Toyota Corona CS 2.0L (ST141
> series) auto. The timing belt has broken. When replacing valve timing belt
> where should timing marks be aligned to, both top and bottom pulley. I did
> have a manual, but lent it to "friend" who has now "lost" it. Any
> assistance would be greatly appreciated (also saving me from having to pay a
> mechanic to fix this).
>
> Cheers
> Julie
>
>[/color]
Julie, if no-one here knows you might want to try the main toyota group.
This is the special one for the MR2! I've cross-posted this across there.

Andy

Thanx everyone - will try suggestions.
Julie
"Andy Champ" <no.way@nospam.com> wrote in message
news:42c1b56e$0$6484$cc9e4d1f@news-text.dial.pipex.com...[color=blue]
> Michael & Julie-Anne Kunde wrote:
>[color=green]
>> Hi
>> I'm hoping someone can help me. I have a 1984 Toyota Corona CS 2.0L
>> (ST141
>> series) auto. The timing belt has broken. When replacing valve timing
>> belt
>> where should timing marks be aligned to, both top and bottom pulley. I
>> did
>> have a manual, but lent it to "friend" who has now "lost" it. Any
>> assistance would be greatly appreciated (also saving me from having to
>> pay a
>> mechanic to fix this).
>>
>> Cheers
>> Julie
>>
>>[/color]
> Julie, if no-one here knows you might want to try the main toyota group.
> This is the special one for the MR2! I've cross-posted this across there.
>
> Andy[/color]