|
Re: 1986 toyota pickup carburetor problem
In article <rEcng.1672$il.381@trnddc03>,
"Joseph Wind" <jpg@gif.com.invalid> wrote:
[color=blue]
> Here is a 85 FSM PDF link, I've used it for my 86.
> [url]http://www.truckporn.com/tech/1985toyotatruckfsm.pdf[/url]
>[/color]
You are better off going to this page so you can then DOWNLOAD the 59MB
PDF file
[url]http://www.truckporn.com/tech/[/url]
Trying to open the previous mentioned page will lock up your browser.
[color=blue]
> "gearshift" <hotred1@earthlink.net> wrote in message
> news:c8f2a5ba960f4c4679a4bfcdad1abd31@localhost.talkaboutautos.com...[color=green]
> > The problem:Missing carburetor return spring for bell crank . I have
> > researched various haynes and chiltons repair manuals; and there was no
> > picture on how to install it. The toyota dealership was not helpful
> > either. The engine is a 22R. If someone could download a picture where
> > to place the spring I would be grateful. Thank you from this 65yr old guy.
> >
> >[/color][/color]
--
Welding Instructor - South Seattle Comm. Coll.
- Divers Institute of Technology
CWI/CWE
WABO Examiner
|