negative camber

[sancho_153]

so i ran my car off the road the other night and now my back drivers side wheel has negative camber( top of wheel is leaned in, bottom is leaning out). Not sure if i need to replace the torsion bar or what might have bent. any help would be nice.

[sancho_153]

nothing? wow. thanks

[sancho_153]

does anyone at least know how much a new or used torsion bar would be?

[4speedsleeper]

Originally Posted by sancho_153

nothing? wow. thanks

Its like this, you give us nothing you get nothing we would need pics in order to tell you how to fix your own car. Me personally I learned how to fix my stuff through trial and error. But you kids today want everything handed to you on a platter. With this <<<nothing thanks remark>>>> you wont get very far in this forum.
By the way its not just the torsion bar to be a concern.
You probably have busted bearings and other issues.
but once again I need pics.

[sancho_153]

im not trying to be a smart ass or anything, just kind of in a bad mood due to the damage on the car. apologies if i upset anyone. im not too sure how to put pictures on here but i do know that the "rear axle" (i thought it was a torsion bar) is bent and needs to be replaced. does anyone know how much it would cost for a new one, o.e. or aftermarket, and how hard it is to replace em. thanks.

[tgidavid]

Junkyard is your friend. Last time I got a yard axle is cost me $50. And I'm pretty sure you can find a nice tercel or paseo at any yard.

[sancho_153]

Originally Posted by tgidavid

Junkyard is your friend. Last time I got a yard axle is cost me $50. And I'm pretty sure you can find a nice tercel or paseo at any yard.

so the tercel has the same rear as the paseo?

[sancho_153]

aight so i went to the junkyard a few times and they told me the rear axle wouldnt swap from a tercel to my car(they arent the brightest there)

does anyone know what year tercel's have the same rear axle as my 94 paseo?

[Paseo15psi]

91-99. Most people don't even know what a Paseo is, let alone know what fits what. Sorry for the late response, but when you don't tell us year and model of the car we can't do much. Plus I just plain missed your post... sorry.

[sancho_153]

awesome, thank you very much.
does it matter if its a 2 door or 4 door?

[Paseo15psi]

No it doesn't. You may also want to check your upper shock mounts and your pan-hard bar.

[sancho_153]

i dont know what that is but im sure buddy does.
i really appreciate your help.
i'll try and get some pics posted up when i get it fixed and get my wheels on it

[tgidavid]

I thought I answered this one for ya a while back...

[sancho_153]

i thought it was answered as well but i couldnt find the thread.
thanks for he help guys

[sancho_153]

well sorry for never gett'n back on here guys but the job has been done for a little while. im pretty positive i need new struts(it has a bounce to it like it was lowered) but other than that its good to go.
anyone have and headers they would want to sell?