Will these fit?

[beachbumz]

Does anyone know if these would fit? (without a spacer)

pro comp 107(polished) U.S. Stryker
Size: 16 x 8 Bolt Pattern: 6-5.5
Back Spacing: 4.5 Finish: Polished
Offset: 0mm Load Rating: 2200

haven't been able to find them on anyone's truck..

thanks

[beachbumz]

bump bump anyone...

backspacing seems good at 4.5, just wondering about the calipers.. emailed pro comp but got no answer anyone have a # fro pro comp alloys.. can't find one...


thanks...

[NorCalTacoma]

The specs look legit.

Just make sure you get a hold of ProComp and ask about caliper issues.

[twheat]

there was another member on this board that had either the 1069 or the 1079 series and they cleared. So I would imagine so would these!

[toku58]

They should fit! I was going to get those before the Rockers. But I didn't like how it was not well finished in the cuts of the spokes. I had a chance to see the rims in person at 4wheelparts in Waipahu. Does Maui Offroad carry those? If you have a chance see if they will test fit them for you?
They are on sale buy 3 get 1 free.

[beachbumz]

Originally Posted by twheat

there was another member on this board that had either the 1069 or the 1079 series and they cleared. So I would imagine so would these!

actually on both those rims in the 16's I've heard they wont clear the calipers.. those were my first choices about a month ago.. now the spoke style are starting to grow on me.. polished though.. not chrome..

Hey NorCal... You know of any other dealers selling the raceline rims? found the one on ebay.. he has a 7 sales lifetime rating.. just not sure about ebay...

[NorCalTacoma]

http://www.coolwheels.com/category_d...RacelineWheels

[beachbumz]

Originally Posted by toku58

They should fit! I was going to get those before the Rockers. But I didn't like how it was not well finished in the cuts of the spokes. I had a chance to see the rims in person at 4wheelparts in Waipahu. Does Maui Offroad carry those? If you have a chance see if they will test fit them for you?
They are on sale buy 3 get 1 free.

No went to Maui Offroad, didn't have that one.. + there prices are crazy even compared to 4wheel parts.. The buy 3 get 1 free seems like a great deal on those rims.. + they'll ship over here for like 35.00 young bro's...

So in person was the finish really that bad? I like these and the
Racinline Renegade 8's below

[njmueller363]

Originally Posted by NorCalTacoma

http://www.coolwheels.com/category_d...RacelineWheels

coolwheels.com just sounded funny to me

[beachbumz]

Originally Posted by NorCalTacoma

http://www.coolwheels.com/category_d...RacelineWheels

Thanks Man!!

[toku58]

Originally Posted by beachbumz

No went to Maui Offroad, didn't have that one.. + there prices are crazy even compared to 4wheel parts.. The buy 3 get 1 free seems like a great deal on those rims.. + they'll ship over here for like 35.00 young bro's...

So in person was the finish really that bad? I like these and the
Racinline Renegade 8's below

No not real bad. I'm just a bit anal. The cut between each spoke you still could see the milling marks. Not very bad.
I've looked into it and those rims may require that you grind your calipers. As you look through your rim at the caliper you will notice a ridge line down the middle of it; about 1/2" wide and about 1/4" thick that runs down the length of the back. that is the area that you would need to grind. Other member have done it. I can't remember who it was? but they said it worked O.K. ?

I kinda like the raceline rims too. But you need to ask if they will clear the calipers. The BS is not the issue. The 4.5" BS will give you an idea if they will clear the UCA's but the calipers are a different story.

[toku58]

Hey Scott How about Enkei's?

RT6:



RTS:



Discount Tire You need to call them it's not listed on there website.
About $125 ea. Shipping should be about $45 ea. to your door!!