32" x 10.5 Tires w/ Tuff Country 3" Lft

[otisthelab]

Just would like to know if 32" x 10.5 BFGoodrich A/T's would be a good choice to go with a Tuff Country 3" Lift (the previous one with the rear blocks, not add-a-leaf's. I am not looking for the absolute largest that will fit, just a good, all around size.

thanks for the advice.

[Rodge]

You could fit 285/75/16s(33s) with some trimming and even then you'll rub. 32s will be the perfect size. Not too much fender gap, and plenty of room for articulation.

I have 32s on mine with a 3" Toytec/OME lift and it looks great.

[10SE]

That's pretty much equivalent to 265/75-16's. So, in theory, it should fit fine.

[PiercedTiger]

toytec 3" lift here on 285/75 16's. No trimming needed. Only rubbing so far is on the UCA near the front from cranking the wheels all the way in either direction. Normal driving doesn't require that so it only rubs in low speed turning/manuevering in parking lots or trails.