'07 Output Shaft

[7Ac0mA]

OK,
So I crawled under my truck this morning and the output shaft out of the tranny is a bit different than what Pb's looks like in the Tom Woods DS install pics. Since I'm experiencing some vibes after the lift, I'm seriously considering a Tom Woods DS. Since it seems to be the only fix. Am I missing something here? Are there 2 covers that pop off to expose the bolts to remove the DS or is it a spline that slides into the tranny? Here's a pic.




Any ideas.

[Pb]

2WD's are different. They don't have a front flange to bolt to. They have a spline that fits into the transmission.

I think Tom Woods can make a driveshaft that will work for ya.

[7Ac0mA]

OK OK, so I just want to apologize for my noobness. I'm really picky when it comes to my truck and I dont have a whole lot on $$. But I'm more than capable of doing the work myself. It's just I'm really new at this stuff and I get really frustrated when things don't go the way I had hoped. You guys are awesome and have helped me out a lot KUDOS on the site and moderation!!!

I was on the TW site just now and I think he might be suggesting that the vibes MAY be able to be taken care of by angling the diff. Is this only done by using shims, or is there any play in it to slightly angle it on the leaf mounts. My vibes are pretty darn slight but they still bug me like hell. If there's enough play in the mounts then I might be able to get away with pushing it up right? Just a thought

[Pb]

You'll have to use shims. A 1.5 or 2 degree would probably work for ya.