Light bar - Toyota Nation Forum : Toyota Car and Truck Forums

viper982 · 09-05-2007, 03:32 AM

Hey guys and gals,
I have been looking at light bars for my 07 pre-runner and I am leaning towards the n-fab bar but I found one and I don't know who makes it.
http://img186.imageshack.us/img186/3508/lightbarge9.jpg
Thats the link so if anyone knows who makes that bar can you let me know? Also if anyone knows of another bar that looks simular to this that would be great. I know KC does but that's the only one I have found yet that looks some what like it.
Thanks,
Matt

lvfcfirefighter · 09-05-2007, 04:21 AM

Quote:

Originally Posted by viper982

Hey guys and gals,
I have been looking at light bars for my 07 pre-runner and I am leaning towards the n-fab bar but I found one and I don't know who makes it.
http://img186.imageshack.us/img186/3508/lightbarge9.jpg
Thats the link so if anyone knows who makes that bar can you let me know? Also if anyone knows of another bar that looks simular to this that would be great. I know KC does but that's the only one I have found yet that looks some what like it.
Thanks,
Matt

That is the Randy Ellis bar.

http://www.randyellisdesign.com/2005...0bar/index.htm

tonythemarine · 09-05-2007, 07:54 AM

there's a couple of people that have it on TN. reaaal nice.

cant wait til i get mine... couple more days.

Lou czar · 09-05-2007, 08:21 AM

I am still looking for one I like. I saw one on another taco going down the road the other day that was nice.

viper982 · 09-06-2007, 11:00 AM

Thanks for the reply lvfcfirefighter. I am gonna order that today. If anyone else knows of some other good looking bars post a link.
Thanks,
Matt

mjonags32 · 09-06-2007, 11:20 AM

i wonder if that'll work with a billet grill insert on the bottom?

DucDaEvil · 09-06-2007, 03:23 PM

It will. It does not mount to the lower grill area. It wraps around underneath and bolts under the truck near the skid plate. For those that have an aftermarket skid plate, it should work with that as well

mjonags32 · 09-06-2007, 03:38 PM

Quote:

Originally Posted by DucDaEvil

It will. It does not mount to the lower grill area. It wraps around underneath and bolts under the truck near the skid plate. For those that have an aftermarket skid plate, it should work with that as well

good to know. thanks sal

G-forcexl · 09-07-2007, 01:13 PM

I received my randy ellis light bar yesterday, and if your experience is like mine make sure to have some touch up paint on hand. I was dissapointed in the amount of chips and scratches in my brand new bar. It could be protected MUCH better for shipping. Just my observation.

It fits great though so I guess that is most important. It does come into contact on both sides of the bottom of the front valence, but just barely, and you would never see it unless you lay under the truck.

05 r1racer · 09-07-2007, 02:19 PM

I purchased the Randy Ellis bar for my 04 F250 few years back. I notices there are scratches when it arrived. Thru out the year, the rust has overcome the powdercoating from underneath. With a matter of times, it started to bubble and the rust will appear. I hope the black would be better than the silver coating.

viper982 · 09-07-2007, 03:01 PM

Well it sounds like I should just go with the n-fab bar. Anyone have any problems with that one?
Thanks

DucDaEvil · 09-07-2007, 03:08 PM

I am curious also. What light bar would most people recomend? I was thinking of doing the Randy Ellis in a black finish but now I am concerned about the rust in the future.