New TN User
Join Date: Jun 2003
Location: New Orleans
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Thanked 0 Times in 0 Posts
iTrader Score: 0 reviews
The wireless door lock remote control system has the following functions:
All Doors Lock
Pressing the LOCK switch of the transmitter locks all doors and prohibits the electrical
back door outside handle operation.
All Doors Unlock
Pressing the UNLOCK switch of the transmitter once unlocks the driverís door, and
pressing it again within three seconds unlocks all the doors.
The hazard light flashes once when locking, and flashes twice when unlocking, to
inform that the operation has been completed.
Keeping the PANIC switch of the transmitter pressed longer than about 0.8 seconds
causes the following alarms to activate.
Sounds the horn.
Flashes the hazard lights, headlights, and taillights.
Illuminates the front interior light (Switch is DOOR position).
If none of the doors are opened within 30 seconds after they are unlocked by the
wireless door lock remote control, all the doors are locked again automatically.
If a door is not locked in response to the locking operation of the transmitter, the
integration relay will output a lock signal after the 1 second.
When all the doors are locked, pressing the UNLOCK switch causes the interior lights
to illuminate simultaneously with the unlock operation.
Security Sends an operation signal as a rolling code.
Enables the registering (writing and storing) of 4 types of transmitter recognition
codes in the EEPROM that is contained in the integration relay.