4/5/6/7/8th gen Corolla + AW11 SC parts

[MzKzM]

Ok, I'll use this threat do post some parts I have for (mainly) the AE92.
Parts are located in the Netherlands but I can ship worldwide.

Rear spoiler (3 pcs) for the European corolla liftback. Possible fit for the Geo prizm? 2 available: 1 unpainted, 1 in red but needs a respray anyway. €25,- each.


Auto-plas grille with integrated foglights, mounting points are broken and not so nicely fixed by the previous owner. I'm not going to use it any more so here's your chance to grab a bargain if you know your way with plastic steel putty and/or fibreglass epoxy. Made for the AE92 liftback but should fit the all-trac wagon as well.(might leave a smal gap between the hood and the grille) Not for the sedan versions unles you modify them yourself to fit properly. € 25,-



Corolla E7/E8 & camry V1 & Corona T15 A/C drier/reciever. Brand new, part number: 88470‑12061, €10,-



AE92 fuel grade switch, used but in good condition, €5,-


3x 4AGE EGR valves, of AW11 & AE92. one has a broken mounting point. Pulled them of running engines without check engine light so I suppose they are still in working condition. € 20 for all 3 sets.


Toyota Tazz (South African AE92 facelift) side fender markers, does need some enlargement of the std. hole, €12,- a set of 2.



AE92 all-trac wagon left hand mirror, usede, manual operation, €10,-


AE92 all-trac wagon left hand mirror, used, electric operation, €15,-


Door panels from an European XLi trim. set of 5, (only 4 in picture, there is an extra front LHD panel without central locking switch hole) Should fit the sedan & wagon as well. €10,-


ARC super air intake for the blacktop 20V engines, €225,-



TRD bushes for the AE86. Brand new although some packages are torn. I'm not separating these at the moment.
Stabilizer Ring Bushing / 40818-AE851 / 2
Strut Bar Cushion / 48674-TA451 / 4
Lateral Control Rod Bushing / 48706-TA451 / 1
Front Stabilizer Bushing / 48815-EP851 / 2 (SR, 20mm)
Rear Stabilizer Bushing / 40819-AE851 / 2 (14mm)
^^ €110,- for all above TRD bushes, shipping included.







Shipping outside the EU:
0 - 2 kg € 24,30 2 - 5 kg € 34,30 5 - 10 kg € 58,30 10 - 20 kg € 105,30

[RogueMoog]

Originally Posted by MzKzM

AE92 all-trac wagon corner light drivers side, €5,-

Ahh, if only you had both! Out of curiosity, does this use one or two bulbs? Could I see a pic of the opposite site (where the bulbs plug in)?

[MzKzM]

This is the version with only one bulb. Now that I think of it, I changed to the 2 bulb version so I do have both sides of the singel bulb available. I'll take some pics this afternoon.

[MzKzM]

Here're the requested pics:

[RogueMoog]

I'm interested in the set with the sockets included, but the shipping and exchange rate is killing me Is there a slower / cheaper mail service?

The other set you mentioned, does it have a sort of amber strip at the far end (away from the headlight)? If so, and it has two bulbs, it's probably the same as the US market corners. You can see one pretty well in one of my pics (click here).

Edit:

Originally Posted by MzKzM

AE92 all-trac wagon left hand mirror, usede, manual operation, €10,-

One other thing I noticed. The side mirror seems to have a split or hinge as part of the design at the base of the mirror housing. Does it collapse / fold at that split towards the door?

[MzKzM]

I will look into that but I think this is the cheapest way with a tracking number. I'll check for shipping without a tracking number for you.
The 2-bulb version I have is the JDM type and is the same as the Australian version.
Here's an example: http://www.ebay.com.au/itm/Toyota-Co...#ht_1277wt_960

It uses a 3-wire socket and indeed, 2 lightbulbs.

[RogueMoog]

Interesting. Sorry, I don't mean to derail the for sale topic, these wagons are just something of an obsession of mine, lol. Do the JDM/ADM corners blink when your turn signal is on? Just wondering why they have three wires.

If tracking isn't much more, then I'd prefer to keep it. It's going to kill me, but damn I love finding neat stuff for my cars! Can you answer my question about the side mirror? Though I'd prefer to get a pair, I'm mostly curious about it.

[MzKzM]

Well, it seems the option without track & trace is only available up until 2kg and costs €17,10

Only the amber part of the JDM/ADM corner blinks in stock form, the socket has 3 wires because the 2 bulbs use a common ground.

As for those mirrors, there is some sort of hinge construction, but you can't fold the mirror. Reason for this is there is a spring in the mirror housing that keeps it in the current position.
I guess this was inteded so the mirror zouldn't break of the car in case you drive too close to another car. (some roads over here are quite small for 2 cars to pass)

Again, the Japanese have kept all the really cool stuff for themself. Over there they had some versions with electrical folding mirrors (wich I also have but are not for sale ) wich includes mirrors with 7 wires, a switch with a retract button and a mirror control relay.

Unfortunaly, I only have the 2 mirrors for the drivers side available.

[TruenoRican]

Would you happen to have a 4af oil filter nipple? Or one that came on 4ag without the sandwich plate?

[MzKzM]

I will have a look around when I get back home saturday

[RogueMoog]

Sorry, I've been busy lately and almost forgot about the corner lights. I'm sort of going back & forth on whether to get them. Would they weigh under the 2 kg limit? I'm not sure how much the whole parcel would weigh.

I didn't know the JDM corners blinked with the signals... is that both bulbs or just the amber one? I was going to try rigging up my USDM corners with a 'positive ground.' My USDM corners have the two bulbs per corner linked to the same wiring, so they would both blink and I would need to get an amber bulb for the clear section (traffic laws dictate that front turn signals must be amber).

[MzKzM]

Here's a picture from the back of the JDM corners:


as you can see, there are 3 wires to the main plug and 2 copper traces wich connect to the blinker light.

The 2 European corner lights will stay under the 2 kg, I can even send you the 3th one for spare at nog extra cost.
I have a JSD set for the USDM corolla sedan as well, I bought these for a friend of mine in the assumption they would fit his 3 doors hatchback but it didn't. They are still at my friends place but I'll ask him to drop it off so I can take some pics of those as well. I know it's probably of no use to you but is you can find another buyer perhaps you can safe even more on shipping.
(I think even 5 corners will stay under the 2kg limit)
I'll keep you informed.


I've also added some parts to the list above and am putting some stuff on ebay as well.

[MzKzM]

Originally Posted by TruenoRican

Would you happen to have a 4af oil filter nipple? Or one that came on 4ag without the sandwich plate?

I just went to check my stash o'parts but I couldn't find one, sorry.

[RogueMoog]

I'll go ahead and get the three All-Trac corners. Not sure if I would be interested in the sedan corners, but if you can get a pic, I can ask someone on the All-Trac wagon forum if they'd be interested. (All-Trac sedans over here are pretty much the same outer body as the FWD sedans.) Would save on shipping costs like you said...

[MzKzM]

Yeah I've already taken some pictures of those sedan corners. I just don't have the USB cable with me at the moment so I can't transfer them up to my computer
Will post them tonight for you.