what im workin on

[jakejjs]

just a little rendering of what the pickup will look like as soon as i start/finsih the plastic welding the emblem to its new spot, and im going to shave the turn signals outta there and use the corners as the signal. i like it. if you dont, good thing its not your pickup

[ocb_dave_ocb]

good luck in getting that badge over there.. You will have to cut that piece out and epoxy or fiber glass it

[subliminaltrips]

id do an sas on that truck. looks like a perfect truck to do it on. solid axels are easy to find and the 2wd models are easy as shit to convert to solid axel 4wd.

[jakejjs]

Originally Posted by ocb_dave_ocb

good luck in getting that badge over there.. You will have to cut that piece out and epoxy or fiber glass it

i got the idea from a friend of my roomate. they are all about the VW's and one guy moved his bage over like that, he did it a bit different, im just moving it directly over. he angled it and raised it up. its easy to do with a plastic welding kit and some bondo, just time consuming. just to be safe, i bought a new grille off ebay incase things go sour


AND my unlce has an older turbo supra (89 i think) which has recently been rear ended. and since im the only other person in the family who likes toyota, he's going to be giving me the motor. so i may have a 22-re with 101k and a new timing chain up for sale in the future

[shoes1382006]

looks like it will be tough!

[jakejjs]

defintley tough, but when its done. i personally can sayive never seen anyone do it, even though its probably been done