I just wrapped up converting my 2010 Sequoia Platinum's second row captains chairs out and installing a 40/20/40 bench from a donor 2008 Sequoia SR5.
1. The floor pan is the same for the SR5 and the Platinum I was able to use the stock bolt locations without issue.
2. Have fun with the console. There weren't any instructions I could find to disassemble the console and it took me the better part of an hour to disconnect the seat heater leads from the console.
3. The carpet will need trimming, but not too much. Actually barely needed any trimming to make it fit and I have weathertech floor mats which cover the center bench rails beautiful it really looks stock except for a shallow dip of the carpet beneath the center bench.
Please take a look at the pictures below if you have any questions please let me know, it was a really fun project and my wife loves the new layout with our 3 car seats.
1. The floor pan is the same for the SR5 and the Platinum I was able to use the stock bolt locations without issue.
2. Have fun with the console. There weren't any instructions I could find to disassemble the console and it took me the better part of an hour to disconnect the seat heater leads from the console.
3. The carpet will need trimming, but not too much. Actually barely needed any trimming to make it fit and I have weathertech floor mats which cover the center bench rails beautiful it really looks stock except for a shallow dip of the carpet beneath the center bench.
Please take a look at the pictures below if you have any questions please let me know, it was a really fun project and my wife loves the new layout with our 3 car seats.