Netforcer 04-29-2007, 09:25 PM Finally completed my cold air... Happy to say that I'm the first V6 with a cold air intake:cool:
Enjoy the pics
Full view
http://i55.photobucket.com/albums/g124/Netforcer/P4290301.jpg
Intake
http://i55.photobucket.com/albums/g124/Netforcer/P4290300.jpg
Hose connections
http://i55.photobucket.com/albums/g124/Netforcer/P4290299.jpg
MAF sensor
http://i55.photobucket.com/albums/g124/Netforcer/P4290298.jpg
Tubing going down
http://i55.photobucket.com/albums/g124/Netforcer/P4290297.jpg
Battery location
http://i55.photobucket.com/albums/g124/Netforcer/P4290296.jpg
Ghetto battery box
http://i55.photobucket.com/albums/g124/Netforcer/P4290295.jpg
Had to get a battery cable extension
http://i55.photobucket.com/albums/g124/Netforcer/P4290294.jpg
Netforcer 04-29-2007, 09:36 PM The route Fujita, Spectre, and even K&N will probably take judging by the 4cyl Fujita intake pics
http://i55.photobucket.com/albums/g124/Netforcer/P4290293.jpg
http://i55.photobucket.com/albums/g124/Netforcer/P4290292.jpg
Couple of pics of the painted engine cover
http://i55.photobucket.com/albums/g124/Netforcer/P4290291.jpg
http://i55.photobucket.com/albums/g124/Netforcer/P4290290.jpg
Where the filter sits... to suck in all the cold air it can get:cool:
http://i55.photobucket.com/albums/g124/Netforcer/P4290289.jpg
and finally, a side view
http://i55.photobucket.com/albums/g124/Netforcer/P4290288.jpg
I must say that the car pull a lot harder than when I had the SRI set up... hopefully it'll be even more once I get a new filter... now I just need to learn to ease off the accelerator to save on some gas
CamrySe02 04-29-2007, 10:12 PM Nice custom work.
leasaunce 04-29-2007, 10:43 PM nice work mate! 5/5!! :)
geoff5093 04-29-2007, 10:46 PM Looks great! Where did you get the tubing for it, or was it custom made?
jofrad 04-29-2007, 11:11 PM SWEET!!!!, looking great
touringcamry 04-30-2007, 01:19 AM How do you keep the battery in place?
BigWillie 04-30-2007, 06:05 AM ^^^^^^^^^^
.....with his "Ghetto battery box"!! LOL:smokin:
lammydi 04-30-2007, 08:24 AM You are da Master...:bowdown:
Brandon402 04-30-2007, 09:22 AM Its a shame you didnt get before and after dyno pulls. Id be interested to see what gains there are. And no, unfortunatly, I dont trust the butt dyno. Wishful thinking plays to be a part in that number. Looks good though man, really good. You used spectre parts didnt you?
Joe B 04-30-2007, 09:34 AM Very,very nice!
Is the car noticeably quicker?
Also would that add on void the warranty?
Explicitstylz96 04-30-2007, 09:42 AM Nice!
Supra7m 04-30-2007, 09:51 AM Good and clean job man. My question is the battery too, how did you mount the (ghetto)box sideways in the spot where it used to be? Does it wabble wabble??:) and why a cheap foam filter spend a lil more on the filter and get a water bypass valve if you can, its a cheap assurance.
Oh btw what side is your piping?
Thanks
Garen
Netforcer 04-30-2007, 11:43 AM Thanks for your comments guys
lets see tubing is from here and there... half from spectre, bent tubes are 45 and 90 degree aluminum tubes
battery is held down by the , now known as ghetto box and zipties that hold down the negative end.
I don't trust but dynos either, cuz they're biased... I wanted to do some comparative driving yesterday with fellow TN members running stock to the CP meet, but no one but akira showed up. A dyno was set up at the show too, akira and I were both tempted (use him as a baseline and me with intake) but we backed down...
No dynos for me until I get my exhaust done, which is second on my list
rims being the next on the list
the ghetto box itself is mounted via two screws at the bottom, I used a strip of aluminum with a hole at each end to act like as a brace. No it does not wobble. the negative battery cable and ziptie holds it down firmly
and yes the foam filter will go and an apexi power filter will replace it.
eyeball96 04-30-2007, 04:30 PM I saw it yesterday and Its a fine piece of work, that battery isn't going anywhere!! Good work Pete!..BTW the grill was a nice mod too!
Burnes 04-30-2007, 07:19 PM One question. Is the warranty now voided?
Netforcer 04-30-2007, 09:05 PM why would it be voided?
Federal LAW (Magnussen-Moss Act) spells this out:
In short, the manufacturer or Dealer (acting as the manufacturer's agent) MUST PROVE that the installation of an aftermarket part caused the related failure of an OEM part. They CANNOT VOID your entire warranty for repairs unrelated to the use of aftermarket parts or accesories REGARDLESS OF WHO INSTALLED THEM.
akira751 04-30-2007, 09:58 PM This intake looks so good I was looking for the TRD sticker. Great job again.:smokin:
Burnes 05-01-2007, 08:57 AM why would it be voided?
Federal LAW (Magnussen-Moss Act) spells this out:
In short, the manufacturer or Dealer (acting as the manufacturer's agent) MUST PROVE that the installation of an aftermarket part caused the related failure of an OEM part. They CANNOT VOID your entire warranty for repairs unrelated to the use of aftermarket parts or accesories REGARDLESS OF WHO INSTALLED THEM.
Thanks. Now, where can I get mine?:)
Netforcer 05-01-2007, 10:24 AM Thanks. Now, where can I get mine?:)
you got a 4cyl, so you can get one through Fujita
lammydi 05-01-2007, 11:32 AM you got a 4cyl, so you can get one through Fujita
Did Fujita come out with a CAI? I thought it still "work in progress" like other companies. :sosad:
Netforcer 05-01-2007, 11:56 AM there was a 4cyl camry at HIN in VA that had a Fujita intake... i guess its only a prototype
akira751 05-01-2007, 12:03 PM Did Fujita come out with a CAI? I thought it still "work in progress" like other companies. :sosad:
Check this out. http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTFUJCA%2D3318&MakeCode=toyota&ModelCode=camry&ModelYear=2007%204%20Cyl%2E&ModelDesc=Camry
Raddius 05-01-2007, 12:56 PM Check this out. http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTFUJCA%2D3318&MakeCode=toyota&ModelCode=camry&ModelYear=2007%204%20Cyl%2E&ModelDesc=Camry
WOOOOT! I've been looking daily to see if any performance bolt ons are available. You're lucky it's May 1st instead of April 1st or I would have to get my hurt on. :whatwhat:
lammydi 05-01-2007, 02:11 PM Check this out. http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTFUJCA%2D3318&MakeCode=toyota&ModelCode=camry&ModelYear=2007%204%20Cyl%2E&ModelDesc=Camry
Right on!!! Is this a quality kit or should I wait for the K&N kit? What's your opinion?
nodrogkam 05-01-2007, 02:15 PM i like.
akira751 05-01-2007, 02:27 PM Right on!!! Is this a quality kit or should I wait for the K&N kit? What's your opinion?
Well it looks good and the fit seemed right on but since did'nt hear it or drive the Camry I have to go on what Joe said at HIN and he loves it.
Burnes 05-01-2007, 02:47 PM How hard is the install?
EuroPlate 05-01-2007, 04:27 PM Nothing on their website yet...
http://www.f5air.com/index2.html
And how about they keep the duffel bag and hat and charge $200 for the kit :D
They're even showing a V6 kit on Ptuning.com...price and availability TBA.
http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTFUJCA%2D3317&MakeCode=toyota&ModelCode=camry&ModelYear=2007%20V6&ModelDesc=Camry
Burnes 05-02-2007, 10:54 AM How hard is the install?
???
Burnes 05-03-2007, 08:50 PM Anyone?
akira751 05-03-2007, 10:57 PM How hard is the install?
Its looks easy.
KILRCAM 05-03-2007, 11:15 PM Very nice work bro.
shinm0on 05-03-2007, 11:56 PM even though the i4 intake has a pricing, can we believe
thats legitimate if its not on the website?
akira751 05-04-2007, 12:04 AM even though the i4 intake has a pricing, can we believe
thats legitimate if its not on the website?
I have seen installed in a 2007 Camry.:)
Netforcer 05-04-2007, 05:57 AM Very nice work bro.
Thanks man...
as for intake install... if you know how to take off a bumper, you should be able to install an intake
|