Help! How to remove a bolt for replacing passenger mirror [Archive]

google_seller

01-29-2008, 12:48 AM

Hi! I am trying to replacing the passenger mirror for my Camry LE 2003. I am finding I have troubles removing the old broken mirror. The problem is that I cannot unsrew the third bolt after taking off the other two. There has so little room for my 10mm wrench, so I am wondering if anyone can help me which tool I need to use or which part I need to take off first. Thanks a lot for your help!:sosad:

JSM1284

01-29-2008, 07:13 PM

Take off the door panel.

OVERHAUL

HINT:

Installation is in the reverse order of the removal. But the installation is indicated only when it has a point.
In the RH side, work in the same procedure as in the LH side.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753169

REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY
Remove the front door armrest base cover lower.
Remove the screw.
Using a screwdriver, remove the power window regulator master switch assembly then disconnect the connector.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753170

REMOVE FRONT DOOR LOWER FRAME (http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OD~N/0/89012112/92870401/98671763/98671765/34853741/34866522/56286946) BRACKET GARNISH LH
Using a screwdriver, remove the front door lower frame (http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OD~N/0/89012112/92870401/98671763/98671765/34853741/34866522/56286946) bracket garnish.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753171

REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH
Using a screwdriver, remove the front door inside handle bezel plug.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753172

REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH
Remove the hole plug.
Remove the 5 screws.
Remove the clip.
Using a screwdriver, remove the front door trim board.HINT:</B> Tape the screwdriver tip before use.
Remove the inside handle then disconnect the 2 cables from the front door lock assembly.


Toyota Forums :: Toyota Nation > Toyota Passenger and Sports Car Forums > Camry and Solara Forum > Gen 5 & 6 > Help! How to remove a bolt for replacing passenger mirror PDA Help! How to remove a bolt for replacing passenger mirror google_seller 01-29-2008, 12:48 AM Hi! I am trying to replacing the passenger mirror for my Camry LE 2003. I am finding I have troubles removing the old broken mirror. The problem is that I cannot unsrew the third bolt after taking off the other two. There has so little room for my 10mm wrench, so I am wondering if anyone can help me which tool I need to use or which part I need to take off first. Thanks a lot for your help!:sosad: google_seller 01-29-2008, 07:09 PM Anyone can help? JSM1284 01-29-2008, 07:13 PM Take off the door panel. OVERHAUL HINT: Installation is in the reverse order of the removal. But the installation is indicated only when it has a point. In the RH side, work in the same procedure as in the LH side.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753169 REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSY Remove the front door armrest base cover lower. Remove the screw. Using a screwdriver, remove the power window regulator master switch assembly then disconnect the connector.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753170 REMOVE FRONT DOOR LOWER FRAME (http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OD~N/0/89012112/92870401/98671763/98671765/34853741/34866522/56286946) BRACKET GARNISH LH Using a screwdriver, remove the front door lower frame (http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OD~N/0/89012112/92870401/98671763/98671765/34853741/34866522/56286946) bracket garnish.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753171 REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Using a screwdriver, remove the front door inside handle bezel plug.HINT:</B> Tape the screwdriver tip before use.http://library.motoralldata.com/alldata/MTRLIB~C38044~R0~OB0~P3R0H~N/0/89012112/92870401/98671763/98671765/34853741/34866522/34866523/124439331/124204886/102921151/98753172 REMOVE FRONT DOOR TRIM BOARD SUB-ASSY LH Remove the hole plug. Remove the 5 screws. Remove the clip. Using a screwdriver, remove the front door trim board.HINT:</B> Tape the screwdriver tip before use. Remove the inside handle then disconnect the 2 cables from the front door lock assembly.