smt_007 10-23-2003, 09:48 PM Hey,
Could somone tell me whats involved to Turbo my 3sge engine ST162?, i know about the 3sgte conversion but would rather turbo the 3sge. What is the difference between the 3sge and 3sgte?.
Also could somone tell me where i could get info on a 3sge turbo setup?.
StephenT :)
5thgenGTS 10-24-2003, 08:08 AM only difference between the 3sge n the 3sgte is the T, thats the turbo, the bore is the same, heads the same, everything, only difference is the turbo n turbo accessories. for general info on turbo's n setting up turbo on your car try www.homemadeturbo.com (http://www.homemadeturbo.com) , its mostly honda based but all in all good info
also get in touch with a user named allblackalltrac, he is selling a turbo kit for any celica, it will most definately fit your car as it is off of a 3sgte and made to fit on the 3sge, you can pm him or try and get in touch with him via e-mail at i believe allbalackalltrac@aol.com
Lachean 10-28-2003, 08:40 PM I stand corrected
Originally posted by Lachean
The T isnt the only difference, the 3S-GE is a 2.2 liter instead of a 2 liter, there are many differences, trust me, buying a 3S-GTE and swapping will be much easier and less costly or stressing than trying to Turbo a 3S-GE.... check out the MR2OC forums for more details
Not quite man. 3SGE is 2.0L, its the same basic block but the 3SGTE has a lot of hardcore mods. Lower compression, piston coolers, etc. I wouldn't say its easier to swap the motor, but if you're looking for more than 200whp or 0.5BAR then it would be much more reliable and probably cheaper in the long run. To turbo the 3SGE you'd want to get some parts off the 3SGTE, those being, MAP sensor, turbo, downpipe, manifold, injectors (or 7MGE injectors), 7MGE fuel pump, 3SGTE oil pan and lines. I know the 5SFE ECU is able handle some boost with the 2BAR MAP sensor from the 3SGTE, not sure how the 3SGE ECU would like it.
5thgenGTS 10-29-2003, 01:31 PM Originally posted by Deep
Not quite man. 3SGE is 2.0L, its the same basic block but the 3SGTE has a lot of hardcore mods. Lower compression, piston coolers, etc. I wouldn't say its easier to swap the motor, but if you're looking for more than 200whp or 0.5BAR then it would be much more reliable and probably cheaper in the long run. To turbo the 3SGE you'd want to get some parts off the 3SGTE, those being, MAP sensor, turbo, downpipe, manifold, injectors (or 7MGE injectors), 7MGE fuel pump, 3SGTE oil pan and lines. I know the 5SFE ECU is able handle some boost with the 2BAR MAP sensor from the 3SGTE, not sure how the 3SGE ECU would like it.
damn rite dude, i hate ppl who dont know what their talking about (i.e the 3sge being 2.2L WTF!!!!)
Lachean 10-29-2003, 03:26 PM :disappoin
smt_007 10-29-2003, 09:41 PM Hey guys thanx for the info,
- I am very certain the 3sge was only ever made in the 2.0L version.
This is where im getting my info from:
http://www.turbocelica.8m.com/index.html
- rebuilt 3sge Turbo system with Turbonectic 60-1 T4 making 400hp@18psi to the wheels.
Does anyone know somone i can get in contact with that has a 3sge turbo motor, from what i see here it is possible, i have contacted the owner of that site but they havnt replied yet. Also quoted "Turbo system with stock 3SGE engine internal making 250hp@15psi to the wheels with stock Supra CT-26 turbocharger mounted on 3sgte All-trac turbo cast manifold".
If i go ahead with the build i will be rebuilding the motor with 3sgte internals, or i might get the the turbo and 3sgt turbo manifold and see how the engine copes.
stephenT :)
5thgenGTS 10-30-2003, 05:02 PM Originally posted by Lachean
I stand corrected
sorry man, i didnt mean to be so rude and inconsiderate
Friends????:D
smt_007 10-30-2003, 07:15 PM No worries man, that's the purpose of these forums, to Give and Gain Information. :)
StephenT :)
|
|