1988 toyota pickup parts, tons of good stuff plus more

some of the parts i still have left from the 88 as of 2 25 09

NOTICE: the truck was factory A/C delete! so there are no A/C parts from this one!



i have pics of many of the parts here:
http://smg.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/

anything you see or dont see that you are interested in or are looking for then lemme know!






OEM toyota electrical relays and such from fuse panel etc.

belt idler pulley and bracket from front 22RE engine accessories $25?

good working alternator regulator assembly $22 ?

TOYOTA chrome grille emblem stock '88 style 15?

good driver side parking corner lamp assembly, , $16 ?

air intake duct assembly 22RE 22?

stock 22RE ignition coil $25 ?

spark igniter 25 ?

possible tailgate latching parts if i can figure out where i stashed them over 4 years ago now hmmm

two valve cover mounted 22RE electric vacuum switches, one probably is for the EGR and other for something else on the engine that i dont know, both good shape- one is blue colored and the other one is a dark red or maroon color, $22 pair ?



very nice working heater core control hose valve assembly - this is located under the hood on the firewall way up at the top and middle, $18 ?


good pair of stock factory original wiper arms, painted black, sale pending possibly

dash lights dimmer switch works great $18 ?

many of the gray dash parts, covers,

radio mounting brackets pair $15?

injector wire plug ends x4

nice clean driver side wing vent glass and some related parts


and more




prices are just general, to follow rules here.
package deal very welcome., or trade me for old chevy/gmc full size truck/blazer/burb parts i am looking for many parts '67-72 or '73-80.
need parts such as
stock rear bumper painted,
blue door pull straps with end caps and covers pair('81-87 silverado actually),
'73-80 two-piece driveshaft carrier bearing mounting pad bracket.
original 67-72 wheel covers and hub caps(red or blue bowtie center emblem color)
or 73-75 full wheel covers with fake lugnuts(yellow center emblem color)
good 1975-1980's Q jet carb with auto choke not mounted on intake,
trim pieces inside and out from '67-72 trucks
and more


Randy

i have an 88 4wd. please give me a price on the radiator, the distributor, TB unit, and the coil/igniter. email me at partsslr@yahoo.com

*

How much for the pass side tailgate latch and the retainer that the hinged piece of metal clips to, to prevent the gate from opening too far?

Shipped to 85749. Thanks

hi there sorry nope i removed and junked the bed just after i got the truck years ago

i may have the straps around somewhere still possibly maybe

not sure if i saved anything else or not, cant remember

i could search if you want?

regards
R

Thanks anyway, I went by the junkyard today and got the parts.

Is your truck an automatic with a colum shifter? If so, do you still have the ignition switch assembley(the wiring behing the ignition tumbler) and how much do you want for it? Also, how much do you want for the ignitor that mounts on top of the ignition coil? My e-mail is cityman914@yahoo.com

What about a front grill " T O Y O T A " emblem? If so any pics?

Thanks

*

Do you still have the power steering pump and associated parts, brackets, hoses, reservoir, what about the power steering box, would you happen to have the engine brackets that mount to the bell housing. Thanks






all parts listed here in this thread(plus lots more) that i removed this morning from my 145k miles all original daily driver 1988 pickup

all parts\ listed are at least in good daily driver condition, som are mint and some are jut good shape

none of these parts are broken or damaged, or in other words unuseable

pics and part numbers/codes: VERy available just tell me what you want or need

prices: either you can make me an offer mailed, or i can make you an offer mailed to you based on what i feel is fair or reasonable for the type of part and how hard it may be to find another one identivcal to it,
its up to you which way you want to go regarding pricing :D

anything that you are looking for that might be on a truck like this one then just ask and i can tell you if i have it, or even saved it from this one before i took it to the shredder this morning




radiator= very nice condition= it literally ALWAYS kept the 22RE in proper operating temperature, has factorstock auto trans cooler in it(bottom tank of course)
also have the nice shape factory radiator shroud
22RE fuel pump works VERy well, also it is mounted on the stock pickup style hanger assembly also in great shape!
vapor canister assembly, metal round can style factory 1988 with california emission A.I.R. injection system equipped 22RE, nice shape
good working alternator regulator assembly
set of four matching 14" original factory correct 1988 toyota 5 lug 2 wheel drive steel gray painted rims, no caps or rings for them
driver side parking lamp assembly, polishing compund and some buffing and it will look like or better than brand new
pair of front turn signal assemblies, very complete and with wiring and plugs and all they look nice good fine and work great
very nice 22RE ignitor and coil- will separate
nice AFM assembly, entire assembly
22RE distributor assembly, ran great, nice shape, have cap and wires and all
two valve cover mounted 22RE electric vacuum switches, one for EGR and other for something else on the engine, both good shape! blue colored one, and a dark red colored one
22R power steering pump mounting bracket and idler pulley also, all bolted together
TB unit for 22RE, complete minus the TPs because it was no good anymore
very nice working heater core control hose valve assembly - this is located under the hood on the firewall way up at the top and in the center of the truck
nice working heater control panel assembly for trucks without a/c from factory, it is all complete with kobs or handles- but no faceplate, always worked great
ECU or ECM in passenger side kickpanel for 1988 22RE and 4 speed overdrive automatic transmission, ran and works great, part numbers/codes on the case of it are available
good pair of stock factory original wiper arms, not chromed ones
dash lights dimmer switch works great
driver side dash pad - gray
gray ashtray assembly, good driver condition
multi function steering column mounted switch assembly = this is the switch assembly on the steering column for turn signals, brights, wipers = this one assembly perfectly and has many years of life still left in it :D
driver shape(needing buffed/polished)entire Left hand taillight assembly even with the bulb socket pigtails and all, or will part for lense
pass side taillight housing with bulbs and wiring pigtails, IE it is complete all EXCEPT for the lense
nice set of all three matching pickup truck locks -with nice key- this is the two door locks and the ignition key lock
nice clean driver side wing vent glass
anything you see or dont see that you are interested in or are looking for then lemme know!

Randy

*

*

I also have an 88. I am missing the right side corner light on the front. Would you happen to have one?

*

how about the fuel pump bracket and vapor canister? did they hit the trash? i will check you out on ebay too.

thanks

brian

I am interested in the fan/radiator shroud if you still have it. PM me or post here.

I am in Oklahoma 73020.

Thanks,
Nathan

I would like both parts, the hanger without the pump and the vapor canister. My problem is i am in canada and wondering how much it would cost to ship USPS to, Lindbergh, Alberta, Canada T0A2J0? or if they could be in texas 79735 by july 16 my old man could bring them up. i know that is pushing the time limit but i thought i would ask. just tell me what you would prefer to do for shipping and method of payment. also how did you go about attaching the deck to that '88? i have an 86 and the box is rusted out and i am looking fo ideas on putting a deck on in its place.

thanks

brian

Heard you dump the bed, but just wondering if you had the fuel door? Thanks

Thats cool thanks for the quick response

i talked to the old man he is now flying up here and there is no room in his bags for parts. would both parts fit in a flat rate box (cheapest one), to ship to canada? thanks for the tips for the deck i am currently pulling the box off today.

*

got the box off with a little penetrating fluid and an electric impact, would have been easier with two guys but got it off alone with some creativity. the old man was gonna drive but found a great seat sale so decided to fly. just gotta line up payment email me.

clear

yes email in profile. i was limited in the amount of space i had in the garage to get the box off, i had to push it out of the garage on it's side, lol. the guy that owned the truck last worked at a salt plant so the rust was even worse than just from age and winter road salt! luckily the rest of the truck is not too bad, some bondo and primer should take care of it for a commuter. i have an 06 ford fusion that i take out on the town. i also work at the salt plant so i do not want the fusion to get covered in salt dust, so the toyota will do the trick.
you should try flying it is awesome, i have been since i was a child in 4 seater cessna and other small aircraft.

*

What's even worse out here the county i live in is now using calcium chloride on the roads. the stuff is awesome at removing ice and compact snow at temps below -25C...on more than one occation it was around -30C and the roads were bone dry the day after a good dump of snow! That stuff is even worse on the cars but great when salt stops working because its too cold. i am online all day (till 7pm mountain time) making salt...lol. just msn or email me for payment arrangements

too bad i don't have my camera today! There are some trucks in the parking lot here at work that got some nice rust holes in them!

*

*

Hi. Do you still have the heater control assembly available?

NO A/C PARTS!
the truck was factory a/c delete!

thanks

Could you please email me and give me the price and instructions on buy it. fire5096@yahoo.com

Thanks,

Damon

*

http://img.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/ductingwiperarms.jpg


http://img.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/DSCF0005.jpg



http://img.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/DSCF0004.jpg


http://img.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/DSCF0003.jpg


http://img.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/injectorplugs.jpg




spots on parts are dirt, the parts are dusty dirty a basic wash will clean them right up :D no cracks or break in any parts that i saved,
as any broken parts stayed in the truck for the shredder

wiper arms got some red paint on them but nice otherwise and complete with all small parts intact


and there also are some other parts still not sold from the same truck



thanks

*

I know this a 1988 sale but I'm looking for a front bumber side mounting bracket for a 92. Hoping atleast the used the same mounting bracket through out the earlier years.

http://i38.photobucket.com/albums/e116/Camach/Yota%20Truck/DSC_0051.jpg

Hello do you have the arm rest for the seat. Thanks

Hi I need a float sensor for the gas tank, and a starter. Can you tell me if you have either of these parts or both and how much it would be.

Thanks.



here is a partial list of what i have removed and for sale available from my running daily driver 145k miles 1988 22RE pickup..

i have stuck general prices on each part- in which i believe are probably reasonable, i dont know
mail cost would be around 5 for a small part and 15 for a bigger part in most cases, but not all:

package price deal on several parts very available

make an offer mailed from 62656 on anything



radiator- good driver condition, has factory stock auto trans cooler in it(bottom tank of course) $44 ?

belt idler pulley and bracket from front 22RE engine accessories $28?

22RE fuel pump works VERy well SOLD



good working alternator regulator assembly $20 ?

a couple of the original factory correct 1988 toyota 5 lug 2 wheel drive 14" steel rims, i have no caps or rings for them sorry i got rid of them long ago to the trash or shredder, $20 each or ?

good driver side parking corner lamp assembly, , $16 ?



stock 22RE ignition coil $26 ?
igniter is SOLD

complete AFM assembly always ran fine SOLD

22RE distributor assembly, ran great, nice shape, have cap and wires and all SOLD

two valve cover mounted 22RE electric vacuum switches, one probably is for the EGR and other for something else on the engine that i dont know, both good shape- one is blue colored and the other one is a dark red or maroon color, $18 pair ?

TB unit for 22RE, ran great, SOLD

very nice working heater core control hose valve assembly - this is located under the hood on the firewall way up at the top and in the center of the truck $16 ?

nice working heater control panel assembly for trucks without a/c from factory, it is all complete with kobs or handles- but no faceplate, always worked great SOLD

ECU or ECM for 1988 22RE ran and worked great, part numbers/codes on the case of it are available SOLD

good pair of stock factory original wiper arms, painted black, sale pending possibly

dash lights dimmer switch works great $18 ?

many of the gray dash parts, covers, panels, related parts, and the radio bezel also, possible sale pending on dash parts other than the radio bezel assembly

radio mounting brackets pair $16?

gray ashtray assembly, good driver condition $15 ?


nice set of all three matching pickup truck locks -with nice original toyota key- this is both door locks and the ignition lock SOLD

nice clean driver side wing vent glass and some related parts
and more

anything you see or dont see that you are interested in or are looking for then lemme know!

Randy

*

Can you point me in the right direction for these parts?

Thank you.

hi there

sorry my sensor was bad


and i didnt save the starter

thanks!
randy

*

*

*

I've got an 86 and I'm looking for the fuel tank and fuel pump assembly. I live in zip 27407 and would pay for shipping if you have these parts. Please let me know asap. Thanks JC

do you have the head

*

*

got the turn signals, throttle position sensor, or o2 sensor??

I've got an 86 and I'm looking for the fuel tank and fuel pump assembly. I live in zip 27407 and would pay for shipping if you have these parts. Please let me know asap. Thanks JC


howdy there sorry no the pump sold on ebay

anything else lemme know thanks

*

Hi, Have you still got the radio bezel and if so how much do you want for it? Please e-mail me letting me know, thanks alot Dianne.........email addy is Aniyunwiya2000@yahoo.com

do you happen to have the whole dash
please pm me if you do

would you happen to have any more interior parts left such as the passenger arm rest?
or the window pillar plastic on the passenger side and also the the piece that covers the radio, which isnt the radio bezel but the piece that the radio bezel mounts to (not sure of the name?)

*

would you happen to have any more interior parts left such as the passenger arm rest?
or the window pillar plastic on the passenger side and also the the piece that covers the radio, which isnt the radio bezel but the piece that the radio bezel mounts to (not sure of the name?)

hi there Sullivan hmm well i dont think i saved the pillar piece and only one arm rest was good and i sold it i remember.

the radio piece i am unsure what you are referring to exactly. the metal frame cage thing around it ? or ?

got a pic? or ?

is it on this page: http://smg.photobucket.com/albums/v298/fast68/toyota%20pickup%20parts%201988/



email fastr68@yahoo.com or messenget anytime always am signed into it.


thanks
Randy

do you happen to have the whole dash
please pm me if you dosorry nope i believe i ended up not keeping the dash itself i think something broke on it when i was attempting to remove it.

or something like that. too many vehicles and length of time ago now haha
i can look around and see if i maybe did pull it though. anything is possible. i just cant remember now.


thanks!
randy

still have many parts! all stock factory parts only. from 2wd 88 pickup 4cyl fuel injected auto trans overdrive. gray interior

- gray ashtray and radio surround bezel assembly with lighter and everything intact; has overdrive light in black display area; 84-88 years; good clean condition; non-smoker vehicle.

-spark ignitor assembly that mounts onto the ignition coil; 4 cyl fuel injection style

-ignition coil; stock toyota; 4 cyl fuel injection style; red and black

-one of the two front corner light assemblies with wiring socket plug not cut; orange colored lense; stock original; 84-88 years

-many stock vacuum and cooling system hoses, tubing, and connectors/fittings etc; vacuum switches and such from under hood for 4 cyl fuel injection engines. 84-88

-four wiring plug ends for 4 cyl injectors factory stock toyota style 84-88 years and others.

almost every tube, hose, and line, etc for 22RE engines

and other parts!

just ask!

pics available quickly!

make reasonable offer mailed from 62656


fastr68 on yahoo email or messenger anytime.

randy

radio bezel sold

I got a 1988 toyota pickup, regular cab, 4x4. still got the corner lights and maybe a turn signal? need them for the driver side I hit a deer on sunday morning. maybe a bumper or somthing? grill? Definitely need a corner light for the driver side. email me with the list of what you do have pv2smurf@yahoo.com OR cliffton.jones@ptsi.info . oh and got a coil I'll buy it too. price of them TN BROTHER to email

-88yoyo

I got a 1988 toyota pickup, regular cab, 4x4. still got the corner lights and maybe a turn signal? need them for the driver side I hit a deer on sunday morning. maybe a bumper or somthing? grill? Definitely need a corner light for the driver side. email me with the list of what you do have pv2smurf@yahoo.com OR cliffton.jones@ptsi.info . oh and got a coil I'll buy it too. price of them TN BROTHER to email

-88yoyo

howdy there i have corner light LH side and ignition coil. sending an email to ya :P
crazy deer ahhh!! :P ive never hit one but i know many ppl who have here, one kid i know had both his front and rear windshields busted in his 95 or so sunfire due to a deer running in front of him on the highway at one of the creeks and rolling completely over the top of the car yeah.. crazy,.

also a deer rolled down the side of a 93 chevy astro work van we have and did some interesting damage to it also while traveling down the highway... it has 370k miles on it now still running driving, 4.3L and 700r4 trans.. haha



pic of the coil is on my photobucket.com in 88 toyota parts pics album fast68 username

there are quite a few parts i wish i would have saved that i never imagined ppl would be needing.

such is life though, always like that it seems haha


welp back to the shop now to finish up putting a good old 350 engine in 85 chevy pickup for a friend..

dirty greasy yet again! as usual!

Randy

I was wondering if you have any of the glass for the truck. I'm looking for a rear window preferably a slider. Thanks

I was wondering if you have any of the glass for the truck. I'm looking for a rear window preferably a slider. Thanks
hi there sorry nope i didnt think anyone would want a slider, so i didnt save it or any of the other glass in which i advertised for months, before scrapping the truck, with no interest at all.


anything else lemme know!

thanks

radio mounting brackets pair $15?

Is this still available? what would it cost to ship to 80829?

Would you happen to have the overdrive solenoid for this left ?

I am looking for the door panels and armrest for my 88 toyota 4x4.
Email me at TLGEnterprises@gmail.com or call me at (623)256-8743.

Jerry