zenacom
03-10-2009, 07:50 PM
I am wondering if someone can help me. I am trying to install an after market cd player into the t100. I had a model 86120-33030 radio with anti theft. I am trying to match up the color codes that are given on this site, but it does not seem to be right. I can get power to the radio but, no sound. I do not think the wiring harness color codes match. It seems like the toyota truck harness goes into a break out box that I cannot get to. Took off the left from and right front speaker ocvers and found that the colors are Pink + / Purple - for the left and light green + / blue - for the right, but the colors that are in the harness do not match the pairs.
Can anyone give let me know what the accurate color could is?
Thanks
Danno_MN
03-11-2009, 01:26 AM
It's beyond me - but if nobody here knows, I'd ask Crutchfield (http://www.crutchfield.com). They may sell you a wiring adapter/instructions fairly cheap - the instructions are free if you bought the stereo from them, and they're fond of goodwill advertising.
Danno, thinkin' about a CD/MP3 player himself.
BamZipPow
03-11-2009, 03:51 AM
Sounds like yer using the input cable to the power amp. You should have 2 bundles of cables from the power amp and not just a single bundle. The 2 bundles are standard on most of the older Toyota and Scion vehicles... :D
Was this the stock radio with the cassette tape that you pulled out? If so, you should be able to trace the cable to the power amp and disconnect the 2 cable bundles from that power amp and use those. ;)
zenacom
03-11-2009, 08:36 PM
Thanks for the quick reply. I have attached a picture of the radio cavaty. Regarding your reply you indicated that there is a power amp and harness that comes from it. Is the silver unit that the harness shown in the picture the power amp? If so, do I remove the power amp and use the cable harness that feeds it.
Thanks again
http://www.gardenfreshcorpcafe.com/radio/img00127.jpg