1994 PU Grease Fittings

Where are the Grease Fittings and where do you get new ones to install. Thanks

It would be useful to know what vehicle you have. Your signature says 2004 Corolla, and we probably can't help you with that.

i have 2 toyotas, 2004 corolla and

1994, auto, pickup two wheel drive.

If you are talking about grease fittings, say on the driveshaft, you probably don't have any like me (2wd), I guess 4wd's came with them but not ours. I am still investigating the issue and am going to attempt to install some, or use a grease injection needle to get into the ujoints. Your suspension ball joints do however have fittings, or plugs where you can install fittings if noone has done the job before. You can get zerk fittings at about any autoparts store, big R, Tractor supply, etc. as well as grease guns and the appropriate molly or lithium based grease depending what you are greasing...

Good luck!
89Truk

Just make sure you get metric thread fittings :)

Just make sure you get metric thread fittings :)

Good call, and the appropriate zerks are 6mm, right jayota?

I can't remember :( Probibly