jbtvt
05-09-2009, 02:05 AM
Hey all, first time posting on this site but I've gotten a lot mechanical help here during past projects and wanted to give something back. When I set out to make a winch bumper for my 88 4runner I couldn't find much info or many different styles for ideas, so here's a contribution to that area. I'll try to attach one pic of the finished bumper... I have step by step pics with explanations up on http://www.myspace.com/jbtvt ,click on pics. I'm not going to repost everything here, plus I want to share with yotatech, which has also been helpful. But if you'd like any ideas for a custom bumper click the link.
I maxed this winch out hard and everything held, winching the bottom out from under a 60ft poplar which wedged into the ground and hung up on a tree after I cut it, and multiple self-recoveries have been a cinch. Originally worried about mounting to the crossmember I used as it looked weakish but now I can vouch that this system will take whatever you throw at it.
http://i670.photobucket.com/albums/vv62/jbtvt/DSC00718.jpg
I maxed this winch out hard and everything held, winching the bottom out from under a 60ft poplar which wedged into the ground and hung up on a tree after I cut it, and multiple self-recoveries have been a cinch. Originally worried about mounting to the crossmember I used as it looked weakish but now I can vouch that this system will take whatever you throw at it.
http://i670.photobucket.com/albums/vv62/jbtvt/DSC00718.jpg