CK4500
06-18-2009, 12:32 AM
I designed these mudflap/brackets for my Tacoma. I have a 6" Fabtech lift with 35" tires. This made it impossible to have mudflaps up front. So rather than letting road debris damage my truck, I designed these brackets to "kick back" the flaps. The Front brackets place the mudflaps back 2" and the rear are 1.5". These can be adjusted since I have the flaps laser cut, and then bent to shape from flat material. The further back the flaps are, the longer the flat piece will be. Therefore price will vary. For the ones pictured they will be $230 (brackets only) or $300 (including flaps) plus shipping. If you want Stainless Steel the price will be a little higher. (Aluminum is cheaper to cut) I made mine out of aluminum because I plan on getting them coated with a box liner product, so they can be black!
This picture is crap. I will get some better ones posted if there is any interest.
http://i16.photobucket.com/albums/b5/CK4500/DSC_6432.jpg
This picture is crap. I will get some better ones posted if there is any interest.
http://i16.photobucket.com/albums/b5/CK4500/DSC_6432.jpg