Need Help with Installation

Sup people I'm new to this board and have a question regarding my car.


I have a 91 Celica Convertible
5S-FE (2.2L )
Automatic (I know, it's a shame)

I just bought this from ebay because I want to remove my rusty exhaust manifold and replace it with something nicer while adding a few HP.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2455636133&ssPageName=ADME:B:EOAB:US:6

The seller told me it would fit my car but sizing it up it doesn't look like my oxygen sensor will fit and the exit is at a different angle. Does anyone know if it will fit my car? I don't care if I have to make a few modifications before I install it but I want to get this part chromed and I don't want to waste my money before I know if the part will fit.

Thanks for any help...

Nice looking forum by the way. I'm also a member of 600rr.net if anyone owns the new Honda 600rr.

Sorry, the pics are very fuzzy so it's hard to tell if the bolt pattern is the correct one or if it will fit correctly :(

the pic didnt show up for me but did he tell you where they came from?> like from a different engine or anything?

no he didnt. It does say that it will fit the 90-93 GT and GTS. When I asked if it would fit a 91 Convertible coupe he said it just requires some1 to attach the down pipe to the headers. The angle is different. It seems like it will align up top but I don't know if the exhaust tubing can bend up to the bottom of the headers without something else getting in the way.

well i guess then all you can really do is take a an hour and try it...see if you can put it on yourself and if not i guess you would have to take it somewhere if you are willing to put in the little extra time and money....

Its an MR2 header. You'll have to fab quite a bit of piping for it to work. HotShot will be coming out with theirs soon.

Thanks for the help. How much do you think something like this will cost me?

To fab the dp? Probably $100 or so, depends on the shop.