Need help fast: flywheel torque values?

I am working on my truck and I need to find the torque ratings for the bolts on my flywheel and such, if anyone has a link to a spec sheet or anything that would be amazingly helpful.

Automatic or manual transmission?

28. INSTALL REAR END PLATE
Torque: 7.5 N·m (75 kgf·cm, 66 in.·lbf)
29. A/T:
INSTALL DRIVE PLATE
(a) Apply adhesive to 2 or 3 threads of the mounting bolt end.
Adhesive:Part No. 08833–00070, THREE BOND 1324 or equivalent
(b) Install the front spacer, drive plate and rear spacer on the crankshaft.
(c) Install and uniformly tighten the 8 mounting bolts in several passes, in the sequence shown.
Torque: 83 N·m (850 kgf·cm, 61 ft·lbf)
30. M/T:
INSTALL FLYWHEEL (See step 29)
Torque: 85 N·m (850 kgf·cm, 63 ft·lbf)

You have PM... ;)

Thanks for the help Bam.

Many years ago I had an OR dealer replace my timing belt, the flywheel came loose and stripped the crankshaft. Ouch. They paid half after lots of hassling to replace the crankshaft, which was hard to eat since they'd not torqued it right or it wouldn't have come loose 6 mnths later. Good luck.