anyone know about 4runner speakers wires

i got a 92 4runner as some of you know already that it got back speakers now what i what to know is there wires going back there so i can just hook up and go its just a big job to take off the back panels and i what to know what i'm getting in to before i start
aslo if there is no wires where do the wires from the deck end so i can run them longer
thanks

Originally posted by walter
i got a 92 4runner as some of you know already that it got back speakers now what i what to know is there wires going back there so i can just hook up and go its just a big job to take off the back panels and i what to know what i'm getting in to before i start
aslo if there is no wires where do the wires from the deck end so i can run them longer
thanks

I think you need punctuation before anyone can help you...

I think I understand what you're saying but I'm not sure. You have a 92 4Runner which didn't come with stock rear speakers. You bought speakers and you want to know how to hook them up. In order to do this you may need a new head unit (someone else would know the car better than I) and I doubt there will be any speaker wires already run.

The other alternative I got from your post is that it did come with rear speakers and you just want to know if you can reuse the same speaker wire. If that is the case then the answer is yes and I'm not sure how much of a pain it is to get to your rear speakers. I'd imagine it wouldn't be too bad on that car.

But, I seriously have no idea what exactly you're asking. You need to use capatilization, punctuation and grammar in order for people to understand you. We can't get inside your head...

There is no speakers in the back of the truck.What I what to know is 2 things.
1. do the 92 4runners sr5 come with speakers.
2. if they don't is there speaker wires in place to put them in .

If your car ain't got speakers then it would be more than likely that there is no wires run. Unless there were speaker there before. So to really fin out you gonna have to remove the panel to see if wire are there.